vs.

      Case 865B VHP vs. Caterpillar 14H

      10 reasons to buy Case 865B VHP:

      Steerage

      Turn radius 7.3 m and 7.9 m 8 % less or 0.6 m

      Sizes

      Rear ground clearance 380 mm and 378 mm 1 % more or 2 mm

      Operation

      Front axle standard operating weight 5501.6 kg and 5305 kg 4 % more or 196.6 kg
      Hydraulic system fluid volume 190 l. and 125 l. 34 % more or 65 l.
      Transmission fluid volume 94.6 l. and 83 l. 12 % more or 11.6 l.

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Hydraulic system

      Pump flow rate 185.5 l/min and 243 l/min 24 % less or 57.5 l/min

      Gear box

      Maximum forward speed 42.8 km/h and 42.7 km/h 0 % more or 0.1 km/h

      Dump

      Maximum cutting depth 711.2 mm and 438 mm 38 % more or 273.2 mm

      Circle

      Maximum lifting above ground level 444.5 mm and 419 mm 6 % more or 25.5 mm

      10 reasons to buy Caterpillar 14H:

      Sizes

      Front part clearance 645 mm and 622 mm 4 % more or 23 mm

      Operation

      Fuel Capacity 416 l. and 340.7 l. 18 % more or 75.3 l.
      Rear axle standard operating weight 13504 kg and 10824.5 kg 20 % more or 2679.5 kg
      Cooling system fluid volume 48.3 l. and 39.7 l. 18 % more or 8.6 l.
      Circular gearbox fluid volume 6 l. and 2.8 l. 53 % more or 3.2 l.
      Each tandem case fluid volume 98 l. and 60.2 l. 39 % more or 37.8 l.

      Motor

      Displacement 10.3 l. and 6.7 l. 35 % more or 3.6 l.
      Effective speeds output 7-8 179 kW and 152.9 kW 15 % more or 26.1 kW

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum reverse gear 47.3 km/h and 28.5 km/h 40 % more or 18.8 km/h

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 20 degrees

      Sizes

      Height to cab upper part 3340 mm and 3339 mm
      Between tyres width 2452 mm and 2817 mm
      Dimensional length 8534 mm and 9342 mm
      Wheelbase 6219 mm and 6460 mm
      Blade base 2562 mm and 2860 mm
      Dual axis wheelbase 1594 mm and 1656 mm

      Operation

      Overall standard operating weight 16326.2 kg and 18809 kg

      Motor

      Manufacturer Case and Caterpillar
      Model FPT 6.7L and 3176 ATAAC
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump piston type with load sensing and axial piston

      Gear box

      Transmission type Powershift transmission with direct drive and direct drive, powershift, of planetary type
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 20 degrees and 18 degrees
      General fluctuations 15.3 degrees and 32 degrees

      Dump

      Mouldboard thickness 22 mm and 25 mm
      Left lateral displacement 533.4 mm and 650 mm
      Lateral right shift 685.8 mm and 790 mm
      Lowered blade pressure 9355.8 kg and 15657 kg
      Mouldboard width 4267.2 mm and 4267 mm
      Mouldboard height 600 mm and 686 mm

      Circle

      Diameter 1752.6 mm and 1822 mm

      Images

      Sizes

      1. Dimensional length 8534 mm 1. Dimensional length 9342 mm
      2. Between tyres width 2452 mm 2. Between tyres width 2817 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3339 mm
      4. Wheelbase 6219 mm 4. Wheelbase 6460 mm
      5. Rear ground clearance 380 mm 5. Rear ground clearance 378 mm
      6. Front part clearance 622 mm 6. Front part clearance 645 mm
      7. Dual axis wheelbase 1594 mm 7. Dual axis wheelbase 1656 mm
      8. Blade base 2562 mm 8. Blade base 2860 mm