vs.

      Case 865B VHP vs. John Deere JD670

      14 reasons to buy Case 865B VHP:

      Sizes

      Front part clearance 622 mm and 559 mm 10 % more or 63 mm

      Operation

      Hydraulic system fluid volume 190 l. and 106 l. 44 % more or 84 l.
      Fuel Capacity 340.7 l. and 227 l. 33 % more or 113.7 l.
      Oil system fluid volume 70 l. and 18.9 l. 73 % more or 51.1 l.
      Cooling system fluid volume 39.7 l. and 26.5 l. 33 % more or 13.2 l.
      Each tandem case fluid volume 60.2 l. and 15.1 l. 75 % more or 45.1 l.
      Front axle standard operating weight 5501.6 kg and 3471 kg 37 % more or 2030.6 kg
      Rear axle standard operating weight 10824.5 kg and 8245 kg 24 % more or 2579.5 kg

      Motor

      Torque measured at 1500 rev / min and 1300 rev / min 13 % more or 200 rev
      Effective speeds output 7-8 152.9 kW and 93.2 kW 39 % more or 59.7 kW
      Effective drives torque 7-8 930.1 Nm and 504.4 Nm 46 % more or 425.7 Nm

      Gear box

      Maximum forward speed 42.8 km/h and 38.4 km/h 10 % more or 4.4 km/h
      Maximum reverse gear 28.5 km/h and 12.3 km/h 57 % more or 16.2 km/h

      Circle

      Maximum lifting above ground level 444.5 mm and 409 mm 8 % more or 35.5 mm

      4 reasons to buy John Deere JD670:

      Steerage

      Turn radius 6.7 m and 7.3 m 8 % less or 0.6 m

      Motor

      Power measured at 2300 rev / min and 2200 rev / min 4 % more or 100 rev
      Displacement 6.8 l. and 6.7 l. 1 % more or 0.1 l.

      Hydraulic system

      Pump flow rate 132 l/min and 185.5 l/min 29 % less or 53.5 l/min

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Height to cab upper part 3340 mm and 3200 mm
      Dimensional length 8534 mm and 8310 mm
      Between tyres width 2452 mm and 2340 mm
      Wheelbase 6219 mm and 5970 mm
      Blade base 2562 mm and 2540 mm
      Dual axis wheelbase 1594 mm and 1540 mm

      Operation

      Circular gearbox fluid volume 2.8 l. and 2.8 l.
      Tyre size 17.5-25 and 13.00-24
      Operating voltage 24 V and 24 V
      Overall standard operating weight 16326.2 kg and 11716 kg

      Motor

      Manufacturer Case and John Deere
      Cylinders number 6 and 6
      Aspiration Turbocharger with charge air cooler by oncoming air flow and turbocharging

      Hydraulic system

      Type of pump piston type with load sensing and Variable displacement with locking in the middle position

      Gear box

      Transmission type Powershift transmission with direct drive and powershift
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      General fluctuations 15.3 degrees and 30 degrees
      Wheel tilt 20 degrees and 20 degrees

      Dump

      Mouldboard width 4267.2 mm and 3.7 mm
      Mouldboard height 600 mm and 610 mm
      Mouldboard thickness 22 mm and 22 mm
      Left lateral displacement 533.4 mm and 683 mm
      Lateral right shift 685.8 mm and 683 mm

      Circle

      Rotating 360 degrees and 360 degrees
      Diameter 1752.6 mm and 1470 mm

      Images

      Sizes

      1. Dimensional length 8534 mm 1. Dimensional length 8310 mm
      2. Between tyres width 2452 mm 2. Between tyres width 2340 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 6219 mm 4. Wheelbase 5970 mm
      6. Front part clearance 622 mm 6. Front part clearance 559 mm
      7. Dual axis wheelbase 1594 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2562 mm 8. Blade base 2540 mm