vs.

      Case 865B VHP vs. Volvo G960

      9 reasons to buy Case 865B VHP:

      Steerage

      Turn radius 7.3 m and 7265 m 100 % less or 7257.7 m

      Operation

      Front axle standard operating weight 5501.6 kg and 5100 kg 7 % more or 401.6 kg
      Generator current strength 90 amperes and 80 amperes 11 % more or 10 amperes
      Oil system fluid volume 70 l. and 21.5 l. 69 % more or 48.5 l.
      Cooling system fluid volume 39.7 l. and 34 l. 14 % more or 5.7 l.
      Hydraulic system fluid volume 190 l. and 91 l. 52 % more or 99 l.
      Transmission fluid volume 94.6 l. and 61 l. 36 % more or 33.6 l.

      Motor

      Power measured at 2200 rev / min and 1800 rev / min 18 % more or 400 rev

      Hydraulic system

      Pump flow rate 185.5 l/min and 208 l/min 11 % less or 22.5 l/min

      10 reasons to buy Volvo G960:

      Sizes

      Rear ground clearance 610 mm and 380 mm 38 % more or 230 mm

      Operation

      Each tandem case fluid volume 100 l. and 60.2 l. 40 % more or 39.8 l.
      Rear axle standard operating weight 12450 kg and 10824.5 kg 13 % more or 1625.5 kg
      Fuel Capacity 404 l. and 340.7 l. 16 % more or 63.3 l.

      Motor

      Effective speeds output 7-8 180.5 kW and 152.9 kW 15 % more or 27.6 kW
      Effective drives torque 7-8 1073 Nm and 930.1 Nm 13 % more or 142.9 Nm
      Displacement 7.2 l. and 6.7 l. 7 % more or 0.5 l.

      Gear box

      Maximum forward speed 45.4 km/h and 42.8 km/h 6 % more or 2.6 km/h
      Maximum reverse gear 32 km/h and 28.5 km/h 11 % more or 3.5 km/h

      Dump

      Maximum cutting depth 790 mm and 711.2 mm 10 % more or 78.8 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 23 degrees

      Sizes

      Between tyres width 2452 mm and 2537 mm
      Dimensional length 8534 mm and 9150 mm
      Wheelbase 6219 mm and 6280 mm
      Blade base 2562 mm and 2650 mm
      Height to cab upper part 3340 mm and 3225 mm

      Operation

      Tyre size 17.5-25 and 14:00 x 24, G-2
      Operating voltage 24 V and 24 V
      Overall standard operating weight 16326.2 kg and 17550 kg

      Motor

      Aspiration Turbocharger with charge air cooler by oncoming air flow and Turbocharging with subsequent air cooling (by a cooling radiator)
      Torque measured at 1500 rev / min and 1500 rev / min
      Cylinders number 6 and 6
      Manufacturer Case and Volvo
      Model FPT 6.7L and D7E

      Hydraulic system

      Type of pump piston type with load sensing and axial piston pump

      Gear box

      Transmission type Powershift transmission with direct drive and HTE 840, Sequential direct drive gearbox with shifting under load Volvo
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 20 degrees and 18 degrees
      General fluctuations 15.3 degrees and 16 degrees

      Dump

      Mouldboard thickness 22 mm and 22 mm
      Mouldboard height 600 mm and 635 mm
      Left lateral displacement 533.4 mm and 673 mm
      Lateral right shift 685.8 mm and 673 mm
      Lowered blade pressure 9355.8 kg and 8823 kg
      Mouldboard width 4267.2 mm and 3657.6 mm

      Circle

      Diameter 1752.6 mm and 1626 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      8. Blade base 2562 mm 8. Blade base 2650 mm
      1. Dimensional length 8534 mm 1. Dimensional length 9150 mm
      2. Between tyres width 2452 mm 2. Between tyres width 2537 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3225 mm
      4. Wheelbase 6219 mm 4. Wheelbase 6280 mm
      5. Rear ground clearance 380 mm 5. Rear ground clearance 610 mm