vs.

      Case 865B VHP vs. Volvo G976

      7 reasons to buy Case 865B VHP:

      Steerage

      Turn radius 7.3 m and 7640 m 100 % less or 7632.7 m

      Operation

      Oil system fluid volume 70 l. and 39 l. 44 % more or 31 l.
      Hydraulic system fluid volume 190 l. and 144 l. 24 % more or 46 l.
      Transmission fluid volume 94.6 l. and 61 l. 36 % more or 33.6 l.
      Generator current strength 90 amperes and 80 amperes 11 % more or 10 amperes

      Motor

      Power measured at 2200 rev / min and 1700 rev / min 23 % more or 500 rev

      Hydraulic system

      Pump flow rate 185.5 l/min and 208 l/min 11 % less or 22.5 l/min

      12 reasons to buy Volvo G976:

      Operation

      Each tandem case fluid volume 100 l. and 60.2 l. 40 % more or 39.8 l.
      Cooling system fluid volume 47 l. and 39.7 l. 16 % more or 7.3 l.
      Front axle standard operating weight 5600 kg and 5501.6 kg 2 % more or 98.4 kg
      Rear axle standard operating weight 14200 kg and 10824.5 kg 24 % more or 3375.5 kg
      Fuel Capacity 498 l. and 340.7 l. 32 % more or 157.3 l.

      Motor

      Effective speeds output 7-8 195.4 kW and 152.9 kW 22 % more or 42.5 kW
      Effective drives torque 7-8 1188 Nm and 930.1 Nm 22 % more or 257.9 Nm
      Displacement 9.4 l. and 6.7 l. 29 % more or 2.7 l.
      Torque measured at 1550 rev / min and 1500 rev / min 3 % more or 50 rev

      Gear box

      Maximum forward speed 43.8 km/h and 42.8 km/h 2 % more or 1.0 km/h
      Maximum reverse gear 30.1 km/h and 28.5 km/h 5 % more or 1.6 km/h

      Dump

      Maximum cutting depth 775 mm and 711.2 mm 8 % more or 63.8 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 21 degrees

      Sizes

      Height to cab upper part 3340 mm and 3225 mm
      Dimensional length 8534 mm and 9500 mm
      Between tyres width 2452 mm and 2780 mm
      Wheelbase 6219 mm and 6531 mm
      Blade base 2562 mm and 2790 mm

      Operation

      Tyre size 17.5-25 and 14:00 x 24, G-2
      Operating voltage 24 V and 24 V
      Overall standard operating weight 16326.2 kg and 19800 kg

      Motor

      Manufacturer Case and Volvo
      Model FPT 6.7L and D9B
      Aspiration Turbocharger with charge air cooler by oncoming air flow and Turbocharging with subsequent air cooling (by a cooling radiator)
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump piston type with load sensing and axial piston pump

      Gear box

      Transmission type Powershift transmission with direct drive and HTE 840, Sequential direct drive gearbox with shifting under load Volvo
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 20 degrees and 18 degrees
      General fluctuations 15.3 degrees and 16 degrees

      Dump

      Mouldboard width 4267.2 mm and 3657.6 mm
      Mouldboard height 600 mm and 737 mm
      Mouldboard thickness 22 mm and 25 mm
      Left lateral displacement 533.4 mm and 673 mm
      Lateral right shift 685.8 mm and 673 mm
      Lowered blade pressure 9355.8 kg and 9776 kg

      Circle

      Rotating 360 degrees and 360 degrees
      Diameter 1752.6 mm and 1626 mm

      Images

      Sizes

      1. Dimensional length 8534 mm 1. Dimensional length 9500 mm
      2. Between tyres width 2452 mm 2. Between tyres width 2780 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3225 mm
      4. Wheelbase 6219 mm 4. Wheelbase 6531 mm
      8. Blade base 2562 mm 8. Blade base 2790 mm