vs.

      Case 885 vs. John Deere 672A

      17 reasons to buy Case 885:

      Sizes

      Front part clearance 622 mm and 559 mm 10 % more or 63 mm

      Operation

      Cooling system fluid volume 40 l. and 26.5 l. 34 % more or 13.5 l.
      Front axle standard operating weight 5103 kg and 3947 kg 23 % more or 1156 kg
      Hydraulic system fluid volume 190 l. and 143.8 l. 24 % more or 46.2 l.
      Rear axle standard operating weight 12147 kg and 8460 kg 30 % more or 3687 kg
      Each tandem case fluid volume 22.7 l. and 18.9 l. 17 % more or 3.8 l.
      Fuel Capacity 340.7 l. and 227 l. 33 % more or 113.7 l.
      Generator current strength 80 amperes and 42 amperes 47 % more or 38 amperes

      Motor

      Torque measured at 1500 rev / min and 1300 rev / min 13 % more or 200 rev
      Effective speeds output 7-8 152.9 kW and 93.2 kW 39 % more or 59.7 kW
      Maximum power 152.9 kW and 93.2 kW 39 % more or 59.7 kW
      Effective drives torque 7-8 881 Nm and 504.4 Nm 43 % more or 376.6 Nm

      Gear box

      Maximum forward speed 43 km/h and 38.5 km/h 10 % more or 4.5 km/h
      Maximum reverse gear 30.6 km/h and 12.2 km/h 60 % more or 18.4 km/h

      Front Axle

      Clearance 622 mm and 559 mm 10 % more or 63 mm

      Dump

      Maximum cutting depth 711 mm and 152 mm 79 % more or 559 mm

      Circle

      Maximum lifting above ground level 442.5 mm and 409 mm 8 % more or 33.5 mm

      5 reasons to buy John Deere 672A:

      Steerage

      Turn radius 6.9 m and 7289 m 100 % less or 7282.1 m

      Operation

      Oil system fluid volume 18.9 l. and 17.8 l. 6 % more or 1.1 l.

      Motor

      Power measured at 2300 rev / min and 2200 rev / min 4 % more or 100 rev
      Displacement 6.8 l. and 6.7 l. 1 % more or 0.1 l.

      Hydraulic system

      Pump flow rate 142.3 l/min and 143.5 l/min 1 % less or 1.2 l/min

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Dual axis wheelbase 1602 mm and 1540 mm
      Height to cab upper part 3340 mm and 3200 mm
      Dimensional length 8534 mm and 8310 mm
      Between tyres width 2650 mm and 2390 mm
      Wheelbase 6219 mm and 5970 mm
      Blade base 2562 mm and 2540 mm

      Operation

      Circular gearbox fluid volume 2.8 l. and 2.8 l.
      Overall standard operating weight 17250 kg and 12407 kg
      Tyre size 14.0 x 24 12PR TL G2 Firestone and 13.00-24
      Operating voltage 24 V and 25 V

      Motor

      Model QSB 6.7, III Level III certified and 6-414T
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging
      Cylinders number 6 and 6
      Manufacturer Cummins and John Deere

      Hydraulic system

      Type of pump piston pump and variable displacement with locking in the middle position

      Gear box

      Forward gears number 8 and 8
      Reverse gears number 4 and 4
      Transmission type powershift and powershift transmission

      Front Axle

      Wheel tilt 17.5 degrees and 20 degrees
      General fluctuations 38 degrees and 30 degrees

      Dump

      Left lateral displacement 533 mm and 683 mm
      Lateral right shift 686 mm and 683 mm
      Mouldboard width 4267 mm and 3.7 mm
      Mouldboard height 600 mm and 610 mm
      Mouldboard thickness 22.2 mm and 22 mm

      Circle

      Diameter 1752 mm and 1.5 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8534 mm 1. Dimensional length 8310 mm
      2. Between tyres width 2650 mm 2. Between tyres width 2390 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 6219 mm 4. Wheelbase 5970 mm
      6. Front part clearance 622 mm 6. Front part clearance 559 mm
      7. Dual axis wheelbase 1602 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2562 mm 8. Blade base 2540 mm