- Home/
- Comparison/
- Grader/
- Case 885 vs. Volvo G740B
Case 885 vs. Volvo G740B
8 reasons to buy Case 885:
Operation
Hydraulic system fluid volume | 190 l. and 134 l. | 29 % more or 56 l. |
Generator current strength | 80 amperes and 75 amperes | 6 % more or 5 amperes |
Front axle standard operating weight | 5103 kg and 5052 kg | 1 % more or 51 kg |
Rear axle standard operating weight | 12147 kg and 11788 kg | 3 % more or 359 kg |
Motor
Torque measured at | 1500 rev / min and 1100 rev / min | 27 % more or 400 rev |
Hydraulic system
Pump flow rate | 143.5 l/min and 284 l/min | 49 % less or 140.5 l/min |
Front Axle
Clearance | 622 mm and 610 mm | 2 % more or 12 mm |
Circle
Maximum lifting above ground level | 442.5 mm and 436.9 mm | 1 % more or 5.6 mm |
12 reasons to buy Volvo G740B:
Operation
Fuel Capacity | 454 l. and 340.7 l. | 25 % more or 113.3 l. |
Cooling system fluid volume | 50 l. and 40 l. | 20 % more or 10 l. |
Transmission fluid volume | 38 l. and 23 l. | 39 % more or 15 l. |
Rear differential/final drive fluid volume | 23 l. and 12 l. | 48 % more or 11 l. |
Each tandem case fluid volume | 100 l. and 22.7 l. | 77 % more or 77.3 l. |
Motor
Effective speeds output 7-8 | 181.2 kW and 152.9 kW | 16 % more or 28.3 kW |
Maximum power | 181.2 kW and 152.9 kW | 16 % more or 28.3 kW |
Effective drives torque 7-8 | 1147 Nm and 881 Nm | 23 % more or 266 Nm |
Displacement | 9.6 l. and 6.7 l. | 30 % more or 2.9 l. |
Gear box
Maximum forward speed | 43.8 km/h and 43 km/h | 2 % more or 0.8 km/h |
Maximum reverse gear | 31.4 km/h and 30.6 km/h | 3 % more or 0.8 km/h |
Dump
Maximum cutting depth | 812.8 mm and 711 mm | 13 % more or 101.8 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 25 degrees and 22 degrees |
Sizes
Blade base | 2562 mm and 2718 mm |
Height to cab upper part | 3340 mm and 3099 mm |
Dimensional length | 8534 mm and 9220 mm |
Between tyres width | 2650 mm and 2540 mm |
Wheelbase | 6219 mm and 6248 mm |
Operation
Tyre size | 14.0 x 24 12PR TL G2 Firestone and 14.00 x 24, G-2 |
Operating voltage | 24 V and 24 V |
Overall standard operating weight | 17250 kg and 16840 kg |
Motor
Manufacturer | Cummins and Volvo |
Model | QSB 6.7, III Level III certified and D10BGAE2 |
Power measured at | 2200 rev / min and 2200 rev / min |
Cylinders number | 6 and 6 |
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging |
Hydraulic system
Type of pump | piston pump and hydraulic system with load sensing |
Overflow valve pressure | 42002.8 kPa and 18615.8 kPa |
Gear box
Transmission type | powershift and powershift transmission |
Forward gears number | 8 and 8 |
Reverse gears number | 4 and 4 |
Front Axle
General fluctuations | 38 degrees and 16 degrees |
Wheel tilt | 17.5 degrees and 18 degrees |
Dump
Lateral right shift | 686 mm and 673.1 mm |
Mouldboard width | 4267 mm and 3657.6 mm |
Mouldboard height | 600 mm and 736.6 mm |
Mouldboard thickness | 22.2 mm and 25.4 mm |
Left lateral displacement | 533 mm and 673.1 mm |
Circle
Diameter | 1752 mm and 1683 mm |
Rotating | 360 degrees and 360 degrees |
Images
Sizes
1. Dimensional length | 8534 mm | 1. Dimensional length | 9220 mm |
2. Between tyres width | 2650 mm | 2. Between tyres width | 2540 mm |
3. Height to cab upper part | 3340 mm | 3. Height to cab upper part | 3099 mm |
4. Wheelbase | 6219 mm | 4. Wheelbase | 6248 mm |
8. Blade base | 2562 mm | 8. Blade base | 2718 mm |