vs.

      Champion C86C vs. John Deere 670CH

      3 reasons to buy Champion C86C:

      Steerage

      Turn radius 2.7 m and 6.7 m 60 % less or 4.0 m

      Motor

      Power measured at 2500 rev / min and 2000 rev / min 20 % more or 500 rev

      Circle

      Maximum lifting above ground level 508 mm and 444 mm 13 % more or 64 mm

      8 reasons to buy John Deere 670CH:

      Motor

      Displacement 6.8 l. and 3.9 l. 43 % more or 2.9 l.
      Effective speeds output 1-2 108.1 kW and 82 kW 24 % more or 26.1 kW
      Cylinders number 6 and 4 33 % more or 2

      Gear box

      Maximum forward speed 40.2 km/h and 32 km/h 20 % more or 8.2 km/h
      Maximum reverse gear 40.2 km/h and 32 km/h 20 % more or 8.2 km/h

      Circle

      Maximum radius outside left tyres 2160 mm and 2210 mm 2 % less or 50 mm
      Right maximum radius outside tyres 2110 mm and 2210 mm 5 % less or 100 mm
      Blade tilt front angle 49 degrees and 45 degrees 8 % more or 4 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 27 degrees and 25 degrees

      Sizes

      Dimensional length 6350 mm and 8580 mm
      Between tyres width 2362 mm and 2460 mm
      Height to cab upper part 2896 mm and 3100 mm

      Operation

      Overall standard operating weight 7030 kg and 13923 kg

      Motor

      Manufacturer Cummins and John Deere
      Model 4BT3.9 and 6068H

      Gear box

      Transmission type Hydro-Static Transmission and powershift

      Front Axle

      Wheel tilt 15 degrees and 20 degrees
      General fluctuations 35 degrees and 32 degrees

      Dump

      Mouldboard width 3353 mm and 3.7 mm
      Mouldboard height 483 mm and 610 mm
      Mouldboard thickness 16 mm and 22 mm

      Circle

      Blade tilt rear angle 5 degrees and 5 degrees

      Images

      Sizes

      1. Dimensional length 6350 mm 1. Dimensional length 8580 mm
      2. Between tyres width 2362 mm 2. Between tyres width 2460 mm
      3. Height to cab upper part 2896 mm 3. Height to cab upper part 3100 mm