vs.

      Champion C86C vs. New Holland F170

      5 reasons to buy Champion C86C:

      Steerage

      Turn radius 2.7 m and 7.3 m 63 % less or 4.6 m

      Motor

      Power measured at 2500 rev / min and 2200 rev / min 12 % more or 300 rev

      Gear box

      Maximum reverse gear 32 km/h and 28.5 km/h 11 % more or 3.5 km/h

      Circle

      Maximum lifting above ground level 508 mm and 444 mm 13 % more or 64 mm
      Blade tilt front angle 45 degrees and 40 degrees 11 % more or 5 degrees

      5 reasons to buy New Holland F170:

      Motor

      Cylinders number 6 and 4 33 % more or 2
      Displacement 8.3 l. and 3.9 l. 53 % more or 4.4 l.

      Gear box

      Maximum forward speed 43 km/h and 32 km/h 26 % more or 11 km/h

      Circle

      Right maximum radius outside tyres 1895 mm and 2210 mm 14 % less or 315 mm
      Maximum radius outside left tyres 1735 mm and 2210 mm 21 % less or 475 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 27 degrees and 25 degrees

      Sizes

      Height to cab upper part 2896 mm and 3340 mm
      Dimensional length 6350 mm and 8521 mm
      Between tyres width 2362 mm and 2510 mm

      Motor

      Manufacturer Cummins and Cummins
      Model 4BT3.9 and 6 CTAA 8.3 2 level

      Gear box

      Transmission type Hydro-Static Transmission and Powershift transmission with direct drive

      Front Axle

      Wheel tilt 15 degrees and 18 degrees
      General fluctuations 35 degrees and 19 degrees

      Dump

      Mouldboard width 3353 mm and 3962 mm
      Mouldboard height 483 mm and 671 mm
      Mouldboard thickness 16 mm and 22 mm

      Circle

      Blade tilt rear angle 5 degrees and 5 degrees

      Images

      Sizes

      2. Between tyres width 2362 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 2896 mm 3. Height to cab upper part 3340 mm
      1. Dimensional length 6350 mm 1. Dimensional length 8521 mm