vs.

      Dressta RD165C vs. Caterpillar 135H

      10 reasons to buy Dressta RD165C:

      Steerage

      Turn radius 7 m and 7.3 m 4 % less or 0.3 m

      Operation

      Cooling system fluid volume 40 l. and 39.4 l. 1 % more or 0.6 l.
      Hydraulic system fluid volume 117 l. and 67 l. 43 % more or 50 l.
      Generator current strength 75 amperes and 35 amperes 53 % more or 40 amperes

      Motor

      Maximum power 119.3 kW and 115.6 kW 3 % more or 3.7 kW
      Power measured at 2500 rev / min and 2000 rev / min 20 % more or 500 rev
      Effective speeds output 5-6 119.3 kW and 115.6 kW 3 % more or 3.7 kW
      Torque measured at 1500 rev / min and 1000 rev / min 33 % more or 500 rev

      Hydraulic system

      Pump flow rate 61.6 l/min and 144 l/min 57 % less or 82.4 l/min

      Circle

      Maximum lifting above ground level 500 mm and 457 mm 9 % more or 43 mm

      9 reasons to buy Caterpillar 135H:

      Operation

      Fuel Capacity 340.7 l. and 325 l. 5 % more or 15.7 l.
      Each tandem case fluid volume 48.1 l. and 25 l. 48 % more or 23.1 l.

      Motor

      Displacement 7.2 l. and 6.7 l. 7 % more or 0.5 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 6 and 3 50 % more or 3
      Maximum forward speed 42 km/h and 40 km/h 5 % more or 2 km/h
      Maximum reverse gear 33.2 km/h and 27 km/h 19 % more or 6.2 km/h

      Front Axle

      Clearance 608 mm and 600 mm 1 % more or 8 mm

      Dump

      Maximum cutting depth 775 mm and 350 mm 55 % more or 425 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 27 degrees and 20 degrees

      Sizes

      Height to cab upper part 3500 mm and 3332 mm
      Dimensional length 8700 mm and 10064 mm
      Between tyres width 2550 mm and 2402 mm
      Wheelbase 6350 mm and 5923 mm
      Blade base 2600 mm and 2596 mm
      Dual axis wheelbase 1498 mm and 1510 mm

      Operation

      Overall standard operating weight 14300 kg and 13081.6 kg
      Operating voltage 24 V and 24 V

      Motor

      Cylinders number 6 and 6
      Manufacturer Cummins and Caterpillar
      Model QSB 6.7 and 3126B DITA ATAAC VHP

      Hydraulic system

      Type of pump axial piston pump and variable displacement piston pump
      Overflow valve pressure 14000 kPa and 24131.6 kPa

      Gear box

      Transmission type powershift transmission and direct drive, powershift

      Front Axle

      General fluctuations 40 degrees and 32 degrees
      Wheel tilt 22 degrees and 18 degrees

      Dump

      Mouldboard thickness 16 mm and 22 mm
      Left lateral displacement 800 mm and 524 mm
      Lateral right shift 800 mm and 660 mm
      Mouldboard width 3640 mm and 3658 mm
      Mouldboard height 650 mm and 610 mm

      Images

      Sizes

      1. Dimensional length 8700 mm 1. Dimensional length 10064 mm
      2. Between tyres width 2550 mm 2. Between tyres width 2402 mm
      3. Height to cab upper part 3500 mm 3. Height to cab upper part 3332 mm
      4. Wheelbase 6350 mm 4. Wheelbase 5923 mm
      7. Dual axis wheelbase 1498 mm 7. Dual axis wheelbase 1510 mm
      8. Blade base 2600 mm 8. Blade base 2596 mm