vs.

      Dressta RD165C vs. John Deere 672A

      13 reasons to buy Dressta RD165C:

      Operation

      Each tandem case fluid volume 25 l. and 18.9 l. 24 % more or 6.1 l.
      Generator current strength 75 amperes and 42 amperes 44 % more or 33 amperes
      Fuel Capacity 325 l. and 227 l. 30 % more or 98 l.
      Cooling system fluid volume 40 l. and 26.5 l. 34 % more or 13.5 l.

      Motor

      Torque measured at 1500 rev / min and 1300 rev / min 13 % more or 200 rev
      Power measured at 2500 rev / min and 2300 rev / min 8 % more or 200 rev
      Maximum power 119.3 kW and 93.2 kW 22 % more or 26.1 kW

      Hydraulic system

      Pump flow rate 61.6 l/min and 142.3 l/min 57 % less or 80.7 l/min

      Gear box

      Maximum forward speed 40 km/h and 38.5 km/h 4 % more or 1.5 km/h
      Maximum reverse gear 27 km/h and 12.2 km/h 55 % more or 14.8 km/h

      Front Axle

      Clearance 600 mm and 559 mm 7 % more or 41 mm

      Dump

      Maximum cutting depth 350 mm and 152 mm 57 % more or 198 mm

      Circle

      Maximum lifting above ground level 500 mm and 409 mm 18 % more or 91 mm

      5 reasons to buy John Deere 672A:

      Steerage

      Turn radius 6.9 m and 7 m 1 % less or 0.1 m

      Operation

      Hydraulic system fluid volume 143.8 l. and 117 l. 19 % more or 26.8 l.

      Motor

      Displacement 6.8 l. and 6.7 l. 1 % more or 0.1 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 4 and 3 25 % more or 1

      Neutral reasons:

      Steerage

      Left and right hinge connection 27 degrees and 25 degrees

      Sizes

      Height to cab upper part 3500 mm and 3200 mm
      Dimensional length 8700 mm and 8310 mm
      Between tyres width 2550 mm and 2390 mm
      Wheelbase 6350 mm and 5970 mm
      Blade base 2600 mm and 2540 mm
      Dual axis wheelbase 1498 mm and 1540 mm

      Operation

      Tyre size 16.9-24 IND TI04 12PR and 13.00-24
      Operating voltage 24 V and 25 V
      Overall standard operating weight 14300 kg and 12407 kg

      Motor

      Manufacturer Cummins and John Deere
      Cylinders number 6 and 6
      Model QSB 6.7 and 6-414T
      Aspiration turbocharging and CAC and turbocharging

      Hydraulic system

      Type of pump axial piston pump and variable displacement with locking in the middle position

      Gear box

      Transmission type powershift transmission and powershift transmission

      Front Axle

      Wheel tilt 22 degrees and 20 degrees
      General fluctuations 40 degrees and 30 degrees

      Dump

      Mouldboard width 3640 mm and 3.7 mm
      Mouldboard height 650 mm and 610 mm
      Mouldboard thickness 16 mm and 22 mm
      Left lateral displacement 800 mm and 683 mm
      Lateral right shift 800 mm and 683 mm

      Circle

      Diameter 1350 mm and 1.5 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8700 mm 1. Dimensional length 8310 mm
      2. Between tyres width 2550 mm 2. Between tyres width 2390 mm
      3. Height to cab upper part 3500 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 6350 mm 4. Wheelbase 5970 mm
      7. Dual axis wheelbase 1498 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2600 mm 8. Blade base 2540 mm