- Home/
- Comparison/
- Grader/
- Dressta RD165C vs. Mauldin MG622
Dressta RD165C vs. Mauldin MG622
8 reasons to buy Dressta RD165C:
Operation
Fuel Capacity | 325 l. and 151.4 l. | 53 % more or 173.6 l. |
Hydraulic system fluid volume | 117 l. and 94.6 l. | 19 % more or 22.4 l. |
Motor
Maximum power | 119.3 kW and 99.2 kW | 17 % more or 20.1 kW |
Displacement | 6.7 l. and 4 l. | 40 % more or 2.7 l. |
Gear box
Forward gears number | 6 and 2 | 67 % more or 4 |
Reverse gears number | 3 and 2 | 33 % more or 1 |
Maximum forward speed | 40 km/h and 35.4 km/h | 11 % more or 4.6 km/h |
Circle
Maximum lifting above ground level | 500 mm and 358.1 mm | 28 % more or 141.9 mm |
3 reasons to buy Mauldin MG622:
Steerage
Turn radius | 6.2 m and 7 m | 11 % less or 0.8 m |
Gear box
Maximum reverse gear | 35.4 km/h and 27 km/h | 24 % more or 8.4 km/h |
Dump
Maximum cutting depth | 596.9 mm and 350 mm | 41 % more or 246.9 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 27 degrees and 24 degrees |
Sizes
Blade base | 2600 mm and 2362.2 mm |
Height to cab upper part | 3500 mm and 2947.4 mm |
Dual axis wheelbase | 1498 mm and 1447.8 mm |
Dimensional length | 8700 mm and 8345.4 mm |
Between tyres width | 2550 mm and 2532.9 mm |
Wheelbase | 6350 mm and 5282.2 mm |
Operation
Overall standard operating weight | 14300 kg and 10360.1 kg |
Tyre size | 16.9-24 IND TI04 12PR and 15.5-25 |
Operating voltage | 24 V and 12 V |
Motor
Manufacturer | Cummins and Deutz |
Model | QSB 6.7 and 2012 |
Aspiration | turbocharging and CAC and turbocharging and cooling at the outlet |
Gear box
Transmission type | powershift transmission and hydrostatic |
Front Axle
Wheel tilt | 22 degrees and 20 degrees |
General fluctuations | 40 degrees and 30 degrees |
Dump
Mouldboard width | 3640 mm and 3657.6 mm |
Mouldboard height | 650 mm and 558.8 mm |
Left lateral displacement | 800 mm and 793.8 mm |
Lateral right shift | 800 mm and 679.5 mm |
Circle
Diameter | 1350 mm and 1371.6 mm |
Images
Sizes
1. Dimensional length | 8700 mm | 1. Dimensional length | 8345.4 mm |
2. Between tyres width | 2550 mm | 2. Between tyres width | 2532.9 mm |
3. Height to cab upper part | 3500 mm | 3. Height to cab upper part | 2947.4 mm |
4. Wheelbase | 6350 mm | 4. Wheelbase | 5282.2 mm |
7. Dual axis wheelbase | 1498 mm | 7. Dual axis wheelbase | 1447.8 mm |
8. Blade base | 2600 mm | 8. Blade base | 2362.2 mm |