vs.

      Dressta RD200C vs. Case 845 DHP

      9 reasons to buy Dressta RD200C:

      Operation

      Transmission fluid volume 35 l. and 25 l. 29 % more or 10 l.
      Each tandem case fluid volume 30 l. and 28.7 l. 4 % more or 1.3 l.
      Fuel Capacity 380 l. and 340.7 l. 10 % more or 39.3 l.

      Motor

      Power measured at 2400 rev / min and 2200 rev / min 8 % more or 200 rev
      Maximum power 132.7 kW and 119.3 kW 10 % more or 13.4 kW

      Hydraulic system

      Pump flow rate 80 l/min and 191.5 l/min 58 % less or 111.5 l/min

      Gear box

      Maximum forward speed 44.7 km/h and 42.9 km/h 4 % more or 1.8 km/h
      Maximum reverse gear 31.4 km/h and 28.5 km/h 9 % more or 2.9 km/h

      Circle

      Maximum lifting above ground level 500 mm and 444.5 mm 11 % more or 55.5 mm

      7 reasons to buy Case 845 DHP:

      Steerage

      Turn radius 7.2 m and 7500 m 100 % less or 7492.8 m

      Operation

      Rear differential/final drive fluid volume 12 l. and 7.5 l. 37 % more or 4.5 l.
      Generator current strength 80 amperes and 75 amperes 6 % more or 5 amperes
      Hydraulic system fluid volume 180 l. and 130 l. 28 % more or 50 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 4 and 3 25 % more or 1

      Dump

      Maximum cutting depth 711.2 mm and 350 mm 51 % more or 361.2 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Height to cab upper part 3300 mm and 3340 mm
      Dimensional length 9540 mm and 8534 mm
      Between tyres width 2500 mm and 2510 mm
      Wheelbase 7300 mm and 6219 mm
      Blade base 3050 mm and 2562 mm
      Dual axis wheelbase 1540 mm and 1594 mm

      Operation

      Tyre size 14.00 - 24 G-2 16PR and 14.0 x 24 12PR TL G2 Firestone
      Overall standard operating weight 36376 kg and 13535 kg
      Operating voltage 24 V and 24 V
      Cooling system fluid volume 40 l. and 40 l.

      Motor

      Displacement 6.7 l. and 6.7 l.
      Aspiration turbocharging and CAC and Turbocharging with charge air cooler
      Manufacturer Cummins and Cummins
      Model QSB 6.7 and QSB 6.7, III Level III certified
      Torque measured at 1500 rev / min and 1500 rev / min
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump axial piston pump and Gear pump with locking in the middle position, with load sensing

      Gear box

      Transmission type powershift transmission and Powershift of the camshaft with direct drive with electronic shift control and inching pedal

      Front Axle

      Wheel tilt 22 degrees and 17.5 degrees
      General fluctuations 40 degrees and 19 degrees

      Dump

      Lateral right shift 800 mm and 686 mm
      Mouldboard width 3660 mm and 3658 mm
      Mouldboard height 670 mm and 559 mm
      Mouldboard thickness 22 mm and 22.2 mm
      Left lateral displacement 800 mm and 533 mm

      Circle

      Rotating 360 degrees and 360 degrees
      Diameter 1350 mm and 1752.6 mm

      Images

      Sizes

      1. Dimensional length 9540 mm 1. Dimensional length 8534 mm
      2. Between tyres width 2500 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3300 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 7300 mm 4. Wheelbase 6219 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1594 mm
      8. Blade base 3050 mm 8. Blade base 2562 mm