vs.

      Dressta RD200C vs. John Deere JD570A

      12 reasons to buy Dressta RD200C:

      Operation

      Each tandem case fluid volume 30 l. and 18.9 l. 37 % more or 11.1 l.
      Fuel Capacity 380 l. and 189.3 l. 50 % more or 190.7 l.
      Cooling system fluid volume 40 l. and 21.2 l. 47 % more or 18.8 l.
      Hydraulic system fluid volume 130 l. and 79.5 l. 39 % more or 50.5 l.

      Motor

      Power measured at 2400 rev / min and 2300 rev / min 4 % more or 100 rev
      Torque measured at 1500 rev / min and 1300 rev / min 13 % more or 200 rev
      Maximum power 132.7 kW and 68.6 kW 48 % more or 64.1 kW
      Displacement 6.7 l. and 5.4 l. 19 % more or 1.3 l.

      Hydraulic system

      Pump flow rate 80 l/min and 102 l/min 22 % less or 22 l/min

      Gear box

      Maximum forward speed 44.7 km/h and 34.8 km/h 22 % more or 9.9 km/h
      Maximum reverse gear 31.4 km/h and 11.4 km/h 64 % more or 20.0 km/h

      Circle

      Maximum lifting above ground level 500 mm and 330 mm 34 % more or 170 mm

      4 reasons to buy John Deere JD570A:

      Steerage

      Turn radius 5.5 m and 7500 m 100 % less or 7494.5 m

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 4 and 3 25 % more or 1

      Front Axle

      Clearance 597 mm and 550 mm 8 % more or 47 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 22 degrees

      Sizes

      Wheelbase 7300 mm and 5280 mm
      Dual axis wheelbase 1540 mm and 1440 mm
      Blade base 3050 mm and 2340 mm
      Height to cab upper part 3300 mm and 3200 mm
      Dimensional length 9540 mm and 7430 mm
      Between tyres width 2500 mm and 2410 mm

      Operation

      Tyre size 14.00 - 24 G-2 16PR and 13.00-24
      Operating voltage 24 V and 12 V
      Overall standard operating weight 36376 kg and 9083 kg

      Motor

      Manufacturer Cummins and John Deere
      Cylinders number 6 and 6
      Aspiration turbocharging and CAC and turbocharging

      Hydraulic system

      Overflow valve pressure 14000 kPa and 13789.5 kPa

      Gear box

      Transmission type powershift transmission and powershift

      Front Axle

      Wheel tilt 22 degrees and 20 degrees
      General fluctuations 40 degrees and 30 degrees

      Dump

      Mouldboard width 3660 mm and 3.7 mm
      Mouldboard height 670 mm and 559 mm
      Mouldboard thickness 22 mm and 15.8 mm
      Left lateral displacement 800 mm and 794 mm
      Lateral right shift 800 mm and 679 mm

      Circle

      Diameter 1350 mm and 1370 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 9540 mm 1. Dimensional length 7430 mm
      2. Between tyres width 2500 mm 2. Between tyres width 2410 mm
      3. Height to cab upper part 3300 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 7300 mm 4. Wheelbase 5280 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1440 mm
      8. Blade base 3050 mm 8. Blade base 2340 mm