vs.

      Dressta RD200C vs. New Holland F106.6

      12 reasons to buy Dressta RD200C:

      Operation

      Transmission fluid volume 35 l. and 21 l. 40 % more or 14 l.
      Generator current strength 75 amperes and 70 amperes 7 % more or 5 amperes
      Fuel Capacity 380 l. and 189 l. 50 % more or 191 l.

      Motor

      Power measured at 2400 rev / min and 2100 rev / min 12 % more or 300 rev
      Effective speeds output 5-6 132.7 kW and 100.7 kW 24 % more or 32.0 kW
      Maximum power 132.7 kW and 100.7 kW 24 % more or 32.0 kW
      Displacement 6.7 l. and 5.9 l. 12 % more or 0.8 l.

      Hydraulic system

      Pump flow rate 80 l/min and 95 l/min 16 % less or 15 l/min

      Gear box

      Maximum forward speed 44.7 km/h and 37.8 km/h 15 % more or 6.9 km/h
      Maximum reverse gear 31.4 km/h and 27.9 km/h 11 % more or 3.5 km/h

      Front Axle

      Clearance 550 mm and 485 mm 12 % more or 65 mm

      Circle

      Maximum lifting above ground level 500 mm and 400 mm 20 % more or 100 mm

      4 reasons to buy New Holland F106.6:

      Steerage

      Turn radius 7250 m and 7500 m 3 % less or 250 m

      Operation

      Hydraulic system fluid volume 170 l. and 130 l. 24 % more or 40 l.
      Each tandem case fluid volume 74 l. and 30 l. 59 % more or 44 l.

      Dump

      Maximum cutting depth 450 mm and 350 mm 22 % more or 100 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 28 degrees

      Sizes

      Wheelbase 7300 mm and 5243 mm
      Blade base 3050 mm and 1981 mm
      Dual axis wheelbase 1540 mm and 1250 mm
      Height to cab upper part 3300 mm and 3184 mm
      Dimensional length 9540 mm and 8888 mm
      Between tyres width 2500 mm and 2307 mm

      Operation

      Overall standard operating weight 36376 kg and 10330 kg
      Tyre size 14.00 - 24 G-2 16PR and 405/70R20
      Operating voltage 24 V and 24 V

      Motor

      Model QSB 6.7 and CNH 4-stroke cycle, naturally aspirated diesel engine
      Cylinders number 6 and 6
      Aspiration turbocharging and CAC and turbocharging, water cooling

      Hydraulic system

      Type of pump axial piston pump and Axial cam pump, variable displacement piston pump
      Overflow valve pressure 14000 kPa and 20000 kPa

      Gear box

      Reverse gears number 3 and 3
      Transmission type powershift transmission and powershift transmission
      Forward gears number 6 and 6

      Front Axle

      Wheel tilt 22 degrees and 22 degrees
      General fluctuations 40 degrees and 15 degrees

      Dump

      Mouldboard thickness 22 mm and 19 mm
      Mouldboard width 3660 mm and 3355 mm
      Left lateral displacement 800 mm and 700 mm
      Mouldboard height 670 mm and 152 mm
      Lateral right shift 800 mm and 500 mm

      Circle

      Rotating 360 degrees and degrees

      Images

      Sizes

      1. Dimensional length 9540 mm 1. Dimensional length 8888 mm
      2. Between tyres width 2500 mm 2. Between tyres width 2307 mm
      3. Height to cab upper part 3300 mm 3. Height to cab upper part 3184 mm
      4. Wheelbase 7300 mm 4. Wheelbase 5243 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1250 mm
      8. Blade base 3050 mm 8. Blade base 1981 mm