vs.

      Dressta RD200C vs. New Holland F170

      10 reasons to buy Dressta RD200C:

      Operation

      Fuel Capacity 380 l. and 340 l. 11 % more or 40 l.
      Hydraulic system fluid volume 130 l. and 95 l. 27 % more or 35 l.
      Transmission fluid volume 35 l. and 19 l. 46 % more or 16 l.
      Each tandem case fluid volume 30 l. and 29 l. 3 % more or 1 l.
      Generator current strength 75 amperes and 70 amperes 7 % more or 5 amperes

      Motor

      Power measured at 2400 rev / min and 2200 rev / min 8 % more or 200 rev

      Hydraulic system

      Pump flow rate 80 l/min and 183 l/min 56 % less or 103 l/min

      Gear box

      Maximum forward speed 44.7 km/h and 43 km/h 4 % more or 1.7 km/h
      Maximum reverse gear 31.4 km/h and 28.5 km/h 9 % more or 2.9 km/h

      Circle

      Maximum lifting above ground level 500 mm and 444 mm 11 % more or 56 mm

      6 reasons to buy New Holland F170:

      Steerage

      Turn radius 7.3 m and 7500 m 100 % less or 7492.7 m

      Motor

      Displacement 8.3 l. and 6.7 l. 19 % more or 1.6 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 4 and 3 25 % more or 1

      Front Axle

      Clearance 622 mm and 550 mm 12 % more or 72 mm

      Dump

      Maximum cutting depth 712 mm and 350 mm 51 % more or 362 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Height to cab upper part 3300 mm and 3340 mm
      Dimensional length 9540 mm and 8521 mm
      Between tyres width 2500 mm and 2510 mm
      Wheelbase 7300 mm and 6219 mm
      Blade base 3050 mm and 2562 mm
      Dual axis wheelbase 1540 mm and 1594 mm

      Operation

      Cooling system fluid volume 40 l. and 40 l.
      Tyre size 14.00 - 24 G-2 16PR and 13.00 x 24 (12PR)
      Operating voltage 24 V and 24 V

      Motor

      Aspiration turbocharging and CAC and turbocharging
      Manufacturer Cummins and Cummins
      Model QSB 6.7 and 6 CTAA 8.3 2 level
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump axial piston pump and full hydraulic system with load sensing
      Overflow valve pressure 14000 kPa and 17900 kPa

      Gear box

      Transmission type powershift transmission and Powershift transmission with direct drive

      Front Axle

      Wheel tilt 22 degrees and 18 degrees
      General fluctuations 40 degrees and 19 degrees

      Dump

      Lateral right shift 800 mm and 686 mm
      Mouldboard width 3660 mm and 3962 mm
      Mouldboard height 670 mm and 671 mm
      Mouldboard thickness 22 mm and 22 mm
      Left lateral displacement 800 mm and 533 mm

      Circle

      Diameter 1350 mm and 1753 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 9540 mm 1. Dimensional length 8521 mm
      2. Between tyres width 2500 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3300 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 7300 mm 4. Wheelbase 6219 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1594 mm
      8. Blade base 3050 mm 8. Blade base 2562 mm