vs.

      Fiat-Hitachi FG105 vs. John Deere 772B

      18 reasons to buy Fiat-Hitachi FG105:

      Sizes

      Front part clearance 635 mm and 572 mm 10 % more or 63 mm

      Operation

      Generator current strength 45 amperes and 42 amperes 7 % more or 3 amperes
      Cooling system fluid volume 27 l. and 26.5 l. 2 % more or 0.5 l.
      Hydraulic system fluid volume 94.6 l. and 87.1 l. 8 % more or 7.5 l.
      Each tandem case fluid volume 30.3 l. and 18.9 l. 38 % more or 11.4 l.

      Motor

      Displacement 8.3 l. and 7.6 l. 8 % more or 0.7 l.
      Power measured at 2300 rev / min and 2200 rev / min 4 % more or 100 rev
      Torque measured at 1500 rev / min and 1400 rev / min 7 % more or 100 rev
      Maximum power 147 kW and 115.6 kW 21 % more or 31.4 kW
      Effective drives torque 7-8 753 Nm and 650.8 Nm 14 % more or 102.2 Nm

      Hydraulic system

      Pump flow rate 163 l/min and 198.4 l/min 18 % less or 35.4 l/min

      Gear box

      Maximum forward speed 42 km/h and 40.6 km/h 3 % more or 1.4 km/h
      Maximum reverse gear 27.4 km/h and 13.8 km/h 50 % more or 13.6 km/h

      Front Axle

      Clearance 635 mm and 572 mm 10 % more or 63 mm

      Circle

      Maximum radius outside left tyres 1759 mm and 2160 mm 19 % less or 401 mm
      Right maximum radius outside tyres 2057 mm and 2110 mm 3 % less or 53 mm
      Maximum lifting above ground level 622 mm and 470 mm 24 % more or 152 mm
      Blade tilt rear angle 27.5 degrees and 5 degrees 82 % more or 22.5 degrees

      8 reasons to buy John Deere 772B:

      Steerage

      Turn radius 6.9 m and 10 m 31 % less or 3.1 m

      Operation

      Front axle maximum operating weight 4830.8 kg and 4210 kg 13 % more or 620.8 kg
      Rear axle maximum operating weight 11829.7 kg and 11390 kg 4 % more or 439.7 kg
      Fuel Capacity 340.7 l. and 299 l. 12 % more or 41.7 l.
      Oil system fluid volume 24.6 l. and 20.3 l. 17 % more or 4.3 l.
      Circular gearbox fluid volume 3.8 l. and 2.8 l. 26 % more or 1.0 l.

      Gear box

      Reverse gears number 4 and 3 25 % more or 1
      Forward gears number 8 and 6 25 % more or 2

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Wheelbase 1538 mm and 5970 mm
      Height to cab upper part 3340 mm and 3090 mm
      Dimensional length 8521 mm and 8510 mm
      Blade base 2642 mm and 2670 mm
      Between tyres width 2540 mm and 2440 mm
      Dual axis wheelbase 5969 mm and 1540 mm

      Operation

      Total maximum operating weight 15600 kg and 16660.4 kg
      Tyre size 13X24(10PR) and 14.00-24
      Operating voltage 24 V and 24 V

      Motor

      Aspiration turbocharging and turbocharging
      Manufacturer Cummins and John Deere
      Model 6 CT8.3 and 6466T
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump fully oil-actuated, variable displacement piston pump and Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume

      Gear box

      Transmission type powershift transmission and powershift

      Front Axle

      Wheel tilt 17.5 degrees and 20 degrees
      General fluctuations 19 degrees and 32 degrees

      Dump

      Mouldboard height 953 mm and 609.6 mm
      Left lateral displacement 533 mm and 683 mm
      Lateral right shift 685 mm and 683 mm
      Mouldboard width 2762 mm and 3657.6 mm

      Circle

      Diameter 1753 mm and 1520 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8521 mm 1. Dimensional length 8510 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2440 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3090 mm
      4. Wheelbase 1538 mm 4. Wheelbase 5970 mm
      6. Front part clearance 635 mm 6. Front part clearance 572 mm
      7. Dual axis wheelbase 5969 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2642 mm 8. Blade base 2670 mm