vs.

      Fiat-Hitachi FG105 vs. Mitsubishi MG330-E

      11 reasons to buy Fiat-Hitachi FG105:

      Operation

      Oil system fluid volume 20.3 l. and 13 l. 36 % more or 7.3 l.
      Generator current strength 45 amperes and 40 amperes 11 % more or 5 amperes
      Hydraulic system fluid volume 94.6 l. and 67 l. 29 % more or 27.6 l.
      Transmission fluid volume 25 l. and 23 l. 8 % more or 2 l.
      Fuel Capacity 299 l. and 230 l. 23 % more or 69 l.

      Motor

      Power measured at 2300 rev / min and 2200 rev / min 4 % more or 100 rev
      Maximum power 147 kW and 100.7 kW 31 % more or 46.3 kW
      Displacement 8.3 l. and 7.5 l. 10 % more or 0.8 l.

      Front Axle

      Clearance 635 mm and 555 mm 13 % more or 80 mm

      Circle

      Maximum lifting above ground level 622 mm and 480 mm 23 % more or 142 mm
      Blade tilt rear angle 27.5 degrees and 5 degrees 82 % more or 22.5 degrees

      6 reasons to buy Mitsubishi MG330-E:

      Operation

      Circular gearbox fluid volume 3.5 l. and 2.8 l. 20 % more or 0.7 l.
      Each tandem case fluid volume 73 l. and 30.3 l. 58 % more or 42.7 l.

      Hydraulic system

      Pump flow rate 120 l/min and 163 l/min 26 % less or 43 l/min

      Gear box

      Reverse gears number 6 and 3 50 % more or 3
      Maximum forward speed 42.6 km/h and 42 km/h 1 % more or 0.6 km/h
      Maximum reverse gear 43.3 km/h and 27.4 km/h 37 % more or 15.9 km/h

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 26 degrees

      Sizes

      Height to cab upper part 3340 mm and 3130 mm
      Dimensional length 8521 mm and 7820 mm
      Between tyres width 2540 mm and 2450 mm
      Wheelbase 1538 mm and 5700 mm
      Blade base 2642 mm and 2500 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 13X24(10PR) and 14.00-24-12

      Motor

      Manufacturer Cummins and Mitsubishi
      Model 6 CT8.3 and 6D16-TE1
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump fully oil-actuated, variable displacement piston pump and Pump with double gear
      Overflow valve pressure 2857 kPa and 17.2 kPa

      Gear box

      Transmission type powershift transmission and planetary gear
      Forward gears number 6 and 6

      Front Axle

      Wheel tilt 17.5 degrees and 20 degrees
      General fluctuations 19 degrees and 30 degrees

      Dump

      Mouldboard width 2762 mm and 3710 mm
      Mouldboard height 953 mm and 610 mm

      Circle

      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8521 mm 1. Dimensional length 7820 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2450 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3130 mm
      4. Wheelbase 1538 mm 4. Wheelbase 5700 mm
      8. Blade base 2642 mm 8. Blade base 2500 mm