- Home/
- Comparison/
- Grader/
- Fiat-Hitachi FG105 vs. Volvo G66
Fiat-Hitachi FG105 vs. Volvo G66
6 reasons to buy Fiat-Hitachi FG105:
Operation
Fuel Capacity | 299 l. and 148 l. | 51 % more or 151 l. |
Cooling system fluid volume | 27 l. and 17 l. | 37 % more or 10 l. |
Rear differential/final drive fluid volume | 42 l. and 17 l. | 60 % more or 25 l. |
Motor
Displacement | 8.3 l. and 3.9 l. | 53 % more or 4.4 l. |
Maximum power | 147 kW and 63.4 kW | 57 % more or 83.6 kW |
Gear box
Maximum forward speed | 42 km/h and 16.1 km/h | 62 % more or 25.9 km/h |
6 reasons to buy Volvo G66:
Steerage
Turn radius | 5 m and 10 m | 50 % less or 5 m |
Operation
Hydraulic system fluid volume | 114 l. and 94.6 l. | 17 % more or 19.4 l. |
Motor
Power measured at | 2500 rev / min and 2300 rev / min | 8 % more or 200 rev |
Hydraulic system
Pump flow rate | 61 l/min and 163 l/min | 63 % less or 102 l/min |
Gear box
Maximum reverse gear | 32.2 km/h and 27.4 km/h | 15 % more or 4.8 km/h |
Dump
Maximum cutting depth | 254 mm and 165 mm | 35 % more or 89 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 25 degrees and 37 degrees |
Sizes
Wheelbase | 1538 mm and 4674 mm |
Blade base | 2642 mm and 1880 mm |
Height to cab upper part | 3340 mm and 2896 mm |
Dimensional length | 8521 mm and 6350 mm |
Between tyres width | 2540 mm and 2184 mm |
Motor
Manufacturer | Cummins and Cummins |
Model | 6 CT8.3 and 4B3.9 |
Hydraulic system
Type of pump | fully oil-actuated, variable displacement piston pump and single stream |
Overflow valve pressure | 2857 kPa and 12410.6 kPa |
Gear box
Transmission type | powershift transmission and hydrostatic |
Dump
Mouldboard width | 2762 mm and 3048 mm |
Mouldboard height | 953 mm and 482.6 mm |
Left lateral displacement | 533 mm and 1168.4 mm |
Lateral right shift | 685 mm and 1168.4 mm |
Images
Sizes
1. Dimensional length | 8521 mm | 1. Dimensional length | 6350 mm |
2. Between tyres width | 2540 mm | 2. Between tyres width | 2184 mm |
3. Height to cab upper part | 3340 mm | 3. Height to cab upper part | 2896 mm |
4. Wheelbase | 1538 mm | 4. Wheelbase | 4674 mm |
8. Blade base | 2642 mm | 8. Blade base | 1880 mm |