vs.

      Fiat-Hitachi FG105 vs. Volvo G710B

      11 reasons to buy Fiat-Hitachi FG105:

      Operation

      Rear differential/final drive fluid volume 42 l. and 23 l. 45 % more or 19 l.

      Motor

      Displacement 8.3 l. and 7.1 l. 14 % more or 1.2 l.
      Power measured at 2300 rev / min and 2200 rev / min 4 % more or 100 rev
      Torque measured at 1500 rev / min and 1400 rev / min 7 % more or 100 rev
      Maximum power 147 kW and 129 kW 12 % more or 18 kW

      Hydraulic system

      Pump flow rate 163 l/min and 284 l/min 43 % less or 121 l/min

      Gear box

      Maximum forward speed 42 km/h and 40.1 km/h 5 % more or 1.9 km/h

      Front Axle

      Clearance 635 mm and 597 mm 6 % more or 38 mm

      Circle

      Maximum lifting above ground level 622 mm and 431.8 mm 31 % more or 190.2 mm
      Blade tilt rear angle 27.5 degrees and 5 degrees 82 % more or 22.5 degrees
      Maximum radius outside left tyres 1759 mm and 2019.3 mm 13 % less or 260.3 mm

      12 reasons to buy Volvo G710B:

      Operation

      Generator current strength 75 amperes and 45 amperes 40 % more or 30 amperes
      Fuel Capacity 378.5 l. and 299 l. 21 % more or 79.5 l.
      Cooling system fluid volume 47 l. and 27 l. 43 % more or 20 l.
      Hydraulic system fluid volume 134 l. and 94.6 l. 29 % more or 39.4 l.
      Transmission fluid volume 38 l. and 25 l. 34 % more or 13 l.
      Each tandem case fluid volume 100 l. and 30.3 l. 70 % more or 69.7 l.

      Motor

      Effective drives torque 7-8 801.3 Nm and 753 Nm 6 % more or 48.3 Nm

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 4 and 3 25 % more or 1
      Maximum reverse gear 28.6 km/h and 27.4 km/h 4 % more or 1.2 km/h

      Dump

      Maximum cutting depth 812.8 mm and 165 mm 80 % more or 647.8 mm

      Circle

      Right maximum radius outside tyres 2044.7 mm and 2057 mm 1 % less or 12.3 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 22 degrees

      Sizes

      Dimensional length 8521 mm and 9093 mm
      Between tyres width 2540 mm and 2489 mm
      Wheelbase 1538 mm and 6096 mm
      Height to cab upper part 3340 mm and 3073 mm
      Blade base 2642 mm and 2616 mm

      Operation

      Tyre size 13X24(10PR) and 13.00 x 24, G-2
      Operating voltage 24 V and 24 V

      Motor

      Aspiration turbocharging and turbocharging
      Manufacturer Cummins and Volvo
      Model 6 CT8.3 and D7DGAE2

      Hydraulic system

      Type of pump fully oil-actuated, variable displacement piston pump and hydraulic system with load sensing
      Overflow valve pressure 2857 kPa and 18615.8 kPa

      Gear box

      Transmission type powershift transmission and powershift transmission

      Front Axle

      Wheel tilt 17.5 degrees and 18 degrees
      General fluctuations 19 degrees and 16 degrees

      Dump

      Left lateral displacement 533 mm and 673.1 mm
      Lateral right shift 685 mm and 673.1 mm
      Lowered blade pressure 7790 kg and 7696.6 kg
      Mouldboard width 2762 mm and 3657.6 mm
      Mouldboard height 953 mm and 635 mm

      Circle

      Diameter 1753 mm and 1683 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8521 mm 1. Dimensional length 9093 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2489 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3073 mm
      4. Wheelbase 1538 mm 4. Wheelbase 6096 mm
      8. Blade base 2642 mm 8. Blade base 2616 mm