vs.

      Fiat-Hitachi FG105 vs. Volvo G726 VHP

      8 reasons to buy Fiat-Hitachi FG105:

      Operation

      Hydraulic system fluid volume 94.6 l. and 90 l. 5 % more or 4.6 l.
      Rear differential/final drive fluid volume 42 l. and 23 l. 45 % more or 19 l.

      Motor

      Maximum power 147 kW and 145.4 kW 1 % more or 1.6 kW

      Hydraulic system

      Pump flow rate 163 l/min and 191 l/min 15 % less or 28 l/min

      Front Axle

      Clearance 635 mm and 610 mm 4 % more or 25 mm

      Circle

      Blade tilt rear angle 27.5 degrees and 6.5 degrees 76 % more or 21.0 degrees
      Maximum radius outside left tyres 1759 mm and 2019.3 mm 13 % less or 260.3 mm
      Maximum lifting above ground level 622 mm and 444.5 mm 29 % more or 177.5 mm

      12 reasons to buy Volvo G726 VHP:

      Operation

      Generator current strength 75 amperes and 45 amperes 40 % more or 30 amperes
      Fuel Capacity 378.5 l. and 299 l. 21 % more or 79.5 l.
      Cooling system fluid volume 47 l. and 27 l. 43 % more or 20 l.
      Transmission fluid volume 38 l. and 25 l. 34 % more or 13 l.
      Each tandem case fluid volume 100 l. and 30.3 l. 70 % more or 69.7 l.

      Motor

      Effective drives torque 7-8 862.3 Nm and 753 Nm 13 % more or 109.3 Nm

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 4 and 3 25 % more or 1
      Maximum forward speed 45.9 km/h and 42 km/h 8 % more or 3.9 km/h
      Maximum reverse gear 32.8 km/h and 27.4 km/h 16 % more or 5.4 km/h

      Dump

      Maximum cutting depth 812.8 mm and 165 mm 80 % more or 647.8 mm

      Circle

      Right maximum radius outside tyres 2006.6 mm and 2057 mm 2 % less or 50.4 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 22 degrees

      Sizes

      Height to cab upper part 3340 mm and 3099 mm
      Dimensional length 8521 mm and 8484 mm
      Between tyres width 2540 mm and 2540 mm
      Wheelbase 1538 mm and 6096 mm
      Blade base 2642 mm and 2591 mm

      Operation

      Tyre size 13X24(10PR) and 14.00 x 24, G-2
      Operating voltage 24 V and 12 V

      Motor

      Model 6 CT8.3 and 6C8.3
      Displacement 8.3 l. and 8.3 l.
      Cylinders number 6 and 6
      Aspiration turbocharging and turbocharging
      Manufacturer Cummins and Cummins

      Hydraulic system

      Type of pump fully oil-actuated, variable displacement piston pump and hydraulic system with load sensing
      Overflow valve pressure 2857 kPa and 17236.9 kPa

      Gear box

      Transmission type powershift transmission and powershift transmission

      Front Axle

      Wheel tilt 17.5 degrees and 15 degrees
      General fluctuations 19 degrees and 16 degrees

      Dump

      Lowered blade pressure 7790 kg and 7893.9 kg
      Mouldboard width 2762 mm and 3657.6 mm
      Left lateral displacement 533 mm and 673.1 mm
      Mouldboard height 953 mm and 635 mm
      Lateral right shift 685 mm and 673.1 mm

      Circle

      Diameter 1753 mm and 1683 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8521 mm 1. Dimensional length 8484 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2540 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3099 mm
      4. Wheelbase 1538 mm 4. Wheelbase 6096 mm
      8. Blade base 2642 mm 8. Blade base 2591 mm