vs.

      Fiat-Hitachi FG105 vs. Volvo G960

      8 reasons to buy Fiat-Hitachi FG105:

      Steerage

      Turn radius 10 m and 7265 m 100 % less or 7255 m

      Operation

      Hydraulic system fluid volume 94.6 l. and 91 l. 4 % more or 3.6 l.

      Motor

      Power measured at 2300 rev / min and 1800 rev / min 22 % more or 500 rev
      Displacement 8.3 l. and 7.2 l. 13 % more or 1.1 l.

      Hydraulic system

      Pump flow rate 163 l/min and 208 l/min 22 % less or 45 l/min

      Front Axle

      Clearance 635 mm and 610 mm 4 % more or 25 mm

      Circle

      Maximum radius outside left tyres 1759 mm and 2020 mm 13 % less or 261 mm
      Blade tilt rear angle 27.5 degrees and 6 degrees 78 % more or 21.5 degrees

      17 reasons to buy Volvo G960:

      Sizes

      Rear ground clearance 610 mm and 331 mm 46 % more or 279 mm

      Operation

      Front axle maximum operating weight 7570 kg and 4210 kg 44 % more or 3360 kg
      Rear axle maximum operating weight 14290 kg and 11390 kg 20 % more or 2900 kg
      Fuel Capacity 404 l. and 299 l. 26 % more or 105 l.
      Oil system fluid volume 21.5 l. and 20.3 l. 6 % more or 1.2 l.
      Cooling system fluid volume 34 l. and 27 l. 21 % more or 7 l.
      Transmission fluid volume 61 l. and 25 l. 59 % more or 36 l.
      Each tandem case fluid volume 100 l. and 30.3 l. 70 % more or 69.7 l.
      Generator current strength 80 amperes and 45 amperes 44 % more or 35 amperes

      Motor

      Maximum power 180.5 kW and 147 kW 19 % more or 33.5 kW
      Effective drives torque 7-8 1073 Nm and 753 Nm 30 % more or 320 Nm

      Gear box

      Reverse gears number 4 and 3 25 % more or 1
      Forward gears number 8 and 6 25 % more or 2
      Maximum forward speed 45.4 km/h and 42 km/h 7 % more or 3.4 km/h
      Maximum reverse gear 32 km/h and 27.4 km/h 14 % more or 4.6 km/h

      Dump

      Maximum cutting depth 790 mm and 165 mm 79 % more or 625 mm

      Circle

      Right maximum radius outside tyres 2010 mm and 2057 mm 2 % less or 47 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 23 degrees

      Sizes

      Dimensional length 8521 mm and 9150 mm
      Between tyres width 2540 mm and 2537 mm
      Wheelbase 1538 mm and 6280 mm
      Blade base 2642 mm and 2650 mm
      Height to cab upper part 3340 mm and 3225 mm

      Operation

      Total maximum operating weight 15600 kg and 21860 kg
      Tyre size 13X24(10PR) and 14:00 x 24, G-2
      Operating voltage 24 V and 24 V

      Motor

      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer Cummins and Volvo
      Model 6 CT8.3 and D7E
      Torque measured at 1500 rev / min and 1500 rev / min
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump fully oil-actuated, variable displacement piston pump and axial piston pump
      Overflow valve pressure 2857 kPa and 20684.3 kPa

      Gear box

      Transmission type powershift transmission and HTE 840, Sequential direct drive gearbox with shifting under load Volvo

      Front Axle

      Wheel tilt 17.5 degrees and 18 degrees
      General fluctuations 19 degrees and 16 degrees

      Dump

      Mouldboard width 2762 mm and 3657.6 mm
      Mouldboard height 953 mm and 635 mm
      Lowered blade pressure 7790 kg and 8823 kg
      Left lateral displacement 533 mm and 673 mm
      Lateral right shift 685 mm and 673 mm

      Circle

      Diameter 1753 mm and 1626 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3225 mm
      4. Wheelbase 1538 mm 4. Wheelbase 6280 mm
      5. Rear ground clearance 331 mm 5. Rear ground clearance 610 mm
      8. Blade base 2642 mm 8. Blade base 2650 mm
      1. Dimensional length 8521 mm 1. Dimensional length 9150 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2537 mm