vs.

      Fiat-Hitachi FG105A vs. John Deere 772CH

      11 reasons to buy Fiat-Hitachi FG105A:

      Sizes

      Front part clearance 635 mm and 587 mm 8 % more or 48 mm

      Operation

      Rear differential/final drive fluid volume 42 l. and 36 l. 14 % more or 6 l.
      Hydraulic system fluid volume 94.6 l. and 59 l. 38 % more or 35.6 l.

      Motor

      Displacement 8.3 l. and 8.1 l. 2 % more or 0.2 l.
      Power measured at 2300 rev / min and 1900 rev / min 17 % more or 400 rev
      Torque measured at 1500 rev / min and 900 rev / min 40 % more or 600 rev

      Hydraulic system

      Pump flow rate 163 l/min and 207.1 l/min 21 % less or 44.1 l/min

      Gear box

      Maximum forward speed 42 km/h and 41.5 km/h 1 % more or 0.5 km/h

      Front Axle

      Clearance 635 mm and 587 mm 8 % more or 48 mm

      Circle

      Maximum lifting above ground level 622 mm and 470 mm 24 % more or 152 mm
      Blade tilt rear angle 27.5 degrees and 5 degrees 82 % more or 22.5 degrees

      18 reasons to buy John Deere 772CH:

      Steerage

      Turn radius 6.7 m and 7.2 m 7 % less or 0.5 m

      Operation

      Generator current strength 55 amperes and 45 amperes 18 % more or 10 amperes
      Circular gearbox fluid volume 3.8 l. and 2.8 l. 26 % more or 1.0 l.
      Front axle maximum operating weight 5139.2 kg and 4380 kg 15 % more or 759.2 kg
      Each tandem case fluid volume 75 l. and 30.3 l. 60 % more or 44.7 l.
      Rear axle maximum operating weight 12029.3 kg and 11670 kg 3 % more or 359.3 kg
      Fuel Capacity 401.3 l. and 299 l. 25 % more or 102.3 l.
      Oil system fluid volume 29 l. and 20.3 l. 30 % more or 8.7 l.
      Cooling system fluid volume 45.4 l. and 27 l. 41 % more or 18.4 l.
      Transmission fluid volume 38 l. and 25 l. 34 % more or 13 l.

      Motor

      Maximum power 156.6 kW and 147 kW 6 % more or 9.6 kW
      Effective drives torque 7-8 1025 Nm and 753 Nm 27 % more or 272 Nm
      Effective speeds output 5-6 156.6 kW and 147 kW 6 % more or 9.6 kW

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 8 and 3 62 % more or 5
      Maximum reverse gear 41.5 km/h and 27.4 km/h 34 % more or 14.1 km/h

      Circle

      Right maximum radius outside tyres 2110 mm and 2733 mm 23 % less or 623 mm
      Maximum radius outside left tyres 2160 mm and 2657 mm 19 % less or 497 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Height to cab upper part 3340 mm and 3120 mm
      Dimensional length 8521 mm and 8610 mm
      Between tyres width 2540 mm and 2510 mm
      Wheelbase 1538 mm and 5970 mm
      Blade base 2642 mm and 2670 mm
      Dual axis wheelbase 5969 mm and 1540 mm

      Operation

      Tyre size 13X24(10PR) and 14.00-24
      Operating voltage 24 V and 24 V
      Total maximum operating weight 16050 kg and 17168.5 kg

      Motor

      Cylinders number 6 and 6
      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer Cummins and John Deere
      Model 6 CT8.3 and 6081H

      Hydraulic system

      Type of pump fully oil-actuated, variable displacement piston pump and variable displacement with locking in the middle position
      Overflow valve pressure 2857 kPa and 17581.6 kPa

      Gear box

      Transmission type powershift transmission and powershift

      Front Axle

      General fluctuations 19 degrees and 32 degrees
      Wheel tilt 17.5 degrees and 20 degrees

      Dump

      Mouldboard width 2762 mm and 3657.6 mm
      Mouldboard height 953 mm and 609.6 mm
      Left lateral displacement 533 mm and 683 mm
      Lateral right shift 685 mm and 683 mm

      Circle

      Diameter 1753 mm and 1520 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3120 mm
      4. Wheelbase 1538 mm 4. Wheelbase 5970 mm
      6. Front part clearance 635 mm 6. Front part clearance 587 mm
      7. Dual axis wheelbase 5969 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2642 mm 8. Blade base 2670 mm
      1. Dimensional length 8521 mm 1. Dimensional length 8610 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2510 mm