vs.

      Fiat-Hitachi FG105A vs. Volvo G780

      8 reasons to buy Fiat-Hitachi FG105A:

      Operation

      Hydraulic system fluid volume 94.6 l. and 90 l. 5 % more or 4.6 l.
      Rear differential/final drive fluid volume 42 l. and 34 l. 19 % more or 8 l.

      Motor

      Power measured at 2300 rev / min and 2100 rev / min 9 % more or 200 rev
      Torque measured at 1500 rev / min and 1300 rev / min 13 % more or 200 rev

      Hydraulic system

      Pump flow rate 163 l/min and 183 l/min 11 % less or 20 l/min

      Gear box

      Maximum forward speed 42 km/h and 38.3 km/h 9 % more or 3.7 km/h

      Circle

      Maximum lifting above ground level 622 mm and 431.8 mm 31 % more or 190.2 mm
      Blade tilt rear angle 27.5 degrees and 13 degrees 53 % more or 14.5 degrees

      14 reasons to buy Volvo G780:

      Operation

      Fuel Capacity 378.5 l. and 299 l. 21 % more or 79.5 l.
      Cooling system fluid volume 50 l. and 27 l. 46 % more or 23 l.
      Transmission fluid volume 38 l. and 25 l. 34 % more or 13 l.
      Each tandem case fluid volume 105 l. and 30.3 l. 71 % more or 74.7 l.
      Generator current strength 75 amperes and 45 amperes 40 % more or 30 amperes

      Motor

      Maximum power 156.6 kW and 147 kW 6 % more or 9.6 kW
      Effective drives torque 7-8 1030.4 Nm and 753 Nm 27 % more or 277.4 Nm
      Displacement 10.8 l. and 8.3 l. 23 % more or 2.5 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 4 and 3 25 % more or 1

      Front Axle

      Clearance 698 mm and 635 mm 9 % more or 63 mm

      Dump

      Maximum cutting depth 838.2 mm and 165 mm 80 % more or 673.2 mm

      Circle

      Maximum radius outside left tyres 2311.4 mm and 2657 mm 13 % less or 345.6 mm
      Right maximum radius outside tyres 2298.7 mm and 2733 mm 16 % less or 434.3 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 22 degrees

      Sizes

      Wheelbase 1538 mm and 6248 mm
      Blade base 2642 mm and 2718 mm
      Height to cab upper part 3340 mm and 3200 mm
      Dimensional length 8521 mm and 8687 mm
      Between tyres width 2540 mm and 2794 mm

      Operation

      Tyre size 13X24(10PR) and 16.00 x 24, G-2
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Cummins and Cummins
      Model 6 CT8.3 and M11
      Aspiration turbocharging and turbocharging

      Hydraulic system

      Type of pump fully oil-actuated, variable displacement piston pump and hydraulic system with load sensing
      Overflow valve pressure 2857 kPa and 17236.9 kPa

      Gear box

      Maximum reverse gear 27.4 km/h and 27.4 km/h
      Transmission type powershift transmission and powershift transmission

      Front Axle

      Wheel tilt 17.5 degrees and 18 degrees
      General fluctuations 19 degrees and 16 degrees

      Dump

      Lowered blade pressure 7790 kg and 10652.6 kg
      Mouldboard width 2762 mm and 4267.2 mm
      Mouldboard height 953 mm and 787.4 mm
      Left lateral displacement 533 mm and 673.1 mm
      Lateral right shift 685 mm and 673.1 mm

      Circle

      Diameter 1753 mm and 1692 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8521 mm 1. Dimensional length 8687 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2794 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 1538 mm 4. Wheelbase 6248 mm
      8. Blade base 2642 mm 8. Blade base 2718 mm