vs.

      John Deere 570B vs. John Deere 770C

      6 reasons to buy John Deere 570B:

      Steerage

      Turn radius 5.5 m and 6.7 m 18 % less or 1.2 m

      Motor

      Power measured at 2300 rev / min and 2000 rev / min 13 % more or 300 rev
      Torque measured at 1300 rev / min and 900 rev / min 31 % more or 400 rev

      Hydraulic system

      Pump flow rate 102 l/min and 207.1 l/min 51 % less or 105.1 l/min

      Circle

      Maximum radius outside left tyres 1960 mm and 2160 mm 9 % less or 200 mm
      Right maximum radius outside tyres 1820 mm and 2110 mm 14 % less or 290 mm

      22 reasons to buy John Deere 770C:

      Sizes

      Front part clearance 638 mm and 597 mm 6 % more or 41 mm

      Operation

      Fuel Capacity 401.3 l. and 189 l. 53 % more or 212.3 l.
      Oil system fluid volume 29 l. and 11 l. 62 % more or 18 l.
      Cooling system fluid volume 45.4 l. and 21.1 l. 54 % more or 24.3 l.
      Hydraulic system fluid volume 59 l. and 53 l. 10 % more or 6 l.
      Circular gearbox fluid volume 3.8 l. and 1.4 l. 63 % more or 2.4 l.
      Each tandem case fluid volume 75 l. and 19 l. 75 % more or 56 l.
      Generator current strength 55 amperes and 42 amperes 24 % more or 13 amperes
      Front axle standard operating weight 3987.1 kg and 2597 kg 35 % more or 1390.1 kg
      Rear axle standard operating weight 10210.4 kg and 6477 kg 37 % more or 3733.4 kg
      Front axle maximum operating weight 4495.1 kg and 3073 kg 32 % more or 1422.1 kg
      Rear axle maximum operating weight 11847.8 kg and 6771 kg 43 % more or 5076.8 kg

      Motor

      Effective speeds output 7-8 115.6 kW and 67.1 kW 42 % more or 48.5 kW
      Maximum power 115.6 kW and 67.1 kW 42 % more or 48.5 kW
      Effective drives torque 7-8 744.3 Nm and 339 Nm 54 % more or 405.3 Nm
      Displacement 8.1 l. and 5.9 l. 27 % more or 2.2 l.

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum forward speed 41.5 km/h and 34.8 km/h 16 % more or 6.7 km/h
      Maximum reverse gear 41.5 km/h and 11.4 km/h 73 % more or 30.1 km/h

      Front Axle

      Clearance 638 mm and 597 mm 6 % more or 41 mm

      Circle

      Maximum lifting above ground level 470 mm and 330 mm 30 % more or 140 mm
      Blade tilt front angle 49 degrees and 32 degrees 35 % more or 17 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Height to cab upper part 3090 mm and 3120 mm
      Dimensional length 7430 mm and 8610 mm
      Between tyres width 2410 mm and 2510 mm
      Wheelbase 5280 mm and 5970 mm
      Blade base 2340 mm and 2670 mm
      Dual axis wheelbase 1440 mm and 1540 mm

      Operation

      Tyre size 13.00-24 and 14.00-24
      Operating voltage 24 V and 24 V
      Overall standard operating weight 9174 kg and 14197.4 kg
      Total maximum operating weight 9844 kg and 16342.9 kg

      Motor

      Model 6059D and 6081H
      Manufacturer John Deere and John Deere
      Cylinders number 6 and 6
      Aspiration natural aspiration and Turbocharging with subsequent air cooling (by a cooling radiator)

      Hydraulic system

      Type of pump Variable displacement volume with controlled pressure and variable displacement with locking in the middle position

      Gear box

      Transmission type powershift and powershift
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 20 degrees and 20 degrees
      General fluctuations 30 degrees and 32 degrees

      Dump

      Mouldboard width 3.7 mm and 3657.6 mm
      Mouldboard height 559 mm and 609.6 mm
      Mouldboard thickness 16 mm and 22.4 mm
      Left lateral displacement 794 mm and 683 mm
      Lateral right shift 679 mm and 683 mm

      Circle

      Diameter 1370 mm and 1520 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 7430 mm 1. Dimensional length 8610 mm
      2. Between tyres width 2410 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3090 mm 3. Height to cab upper part 3120 mm
      4. Wheelbase 5280 mm 4. Wheelbase 5970 mm
      6. Front part clearance 597 mm 6. Front part clearance 638 mm
      7. Dual axis wheelbase 1440 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2340 mm 8. Blade base 2670 mm