vs.

      John Deere 570B vs. Mitsubishi MG430-E

      3 reasons to buy John Deere 570B:

      Operation

      Generator current strength 42 amperes and 40 amperes 5 % more or 2 amperes

      Motor

      Power measured at 2300 rev / min and 2000 rev / min 13 % more or 300 rev

      Gear box

      Forward gears number 8 and 6 25 % more or 2

      14 reasons to buy Mitsubishi MG430-E:

      Operation

      Hydraulic system fluid volume 67 l. and 53 l. 21 % more or 14 l.
      Circular gearbox fluid volume 3.5 l. and 1.4 l. 60 % more or 2.1 l.
      Each tandem case fluid volume 28 l. and 19 l. 32 % more or 9 l.
      Fuel Capacity 210 l. and 189 l. 10 % more or 21 l.
      Oil system fluid volume 16 l. and 11 l. 31 % more or 5 l.

      Motor

      Maximum power 115.6 kW and 67.1 kW 42 % more or 48.5 kW
      Displacement 11.9 l. and 5.9 l. 50 % more or 6.0 l.

      Hydraulic system

      Pump flow rate 100 l/min and 102 l/min 2 % less or 2 l/min

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum forward speed 45.1 km/h and 34.8 km/h 23 % more or 10.3 km/h
      Maximum reverse gear 45.9 km/h and 11.4 km/h 75 % more or 34.5 km/h

      Front Axle

      Clearance 600 mm and 597 mm 0 % more or 3 mm

      Circle

      Maximum lifting above ground level 490 mm and 330 mm 33 % more or 160 mm
      Blade tilt front angle 40 degrees and 32 degrees 20 % more or 8 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 29 degrees

      Sizes

      Between tyres width 2410 mm and 2470 mm
      Wheelbase 5280 mm and 6250 mm
      Blade base 2340 mm and 2670 mm
      Height to cab upper part 3090 mm and 3130 mm
      Dimensional length 7430 mm and 8505 mm

      Operation

      Tyre size 13.00-24 and 14.00-24-12
      Operating voltage 24 V and 24 V
      Overall standard operating weight 9174 kg and 16400 kg

      Motor

      Cylinders number 6 and 6
      Manufacturer John Deere and Mitsubishi
      Model 6059D and 6D24-E1

      Hydraulic system

      Type of pump Variable displacement volume with controlled pressure and Pump with double gear

      Gear box

      Transmission type powershift and planetary gear

      Front Axle

      Wheel tilt 20 degrees and 20 degrees
      General fluctuations 30 degrees and 30 degrees

      Dump

      Mouldboard height 559 mm and 610 mm
      Mouldboard thickness 16 mm and 22 mm

      Circle

      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      8. Blade base 2340 mm 8. Blade base 2670 mm
      1. Dimensional length 7430 mm 1. Dimensional length 8505 mm
      2. Between tyres width 2410 mm 2. Between tyres width 2470 mm
      3. Height to cab upper part 3090 mm 3. Height to cab upper part 3130 mm
      4. Wheelbase 5280 mm 4. Wheelbase 6250 mm