vs.

      John Deere 670B vs. Volvo G86

      10 reasons to buy John Deere 670B:

      Operation

      Front axle standard operating weight 3909 kg and 2400 kg 39 % more or 1509 kg
      Rear axle standard operating weight 9256 kg and 4630 kg 50 % more or 4626 kg
      Fuel Capacity 265 l. and 148 l. 44 % more or 117 l.
      Cooling system fluid volume 26.5 l. and 17 l. 36 % more or 9.5 l.

      Motor

      Effective speeds output 7-8 100.7 kW and 63.4 kW 37 % more or 37.3 kW
      Cylinders number 6 and 4 33 % more or 2
      Maximum power 100.7 kW and 63.4 kW 37 % more or 37.3 kW
      Displacement 6.8 l. and 3.9 l. 43 % more or 2.9 l.

      Gear box

      Maximum forward speed 39.3 km/h and 32 km/h 19 % more or 7.3 km/h

      Front Axle

      Clearance 559 mm and 406 mm 27 % more or 153 mm

      6 reasons to buy Volvo G86:

      Steerage

      Turn radius 5 m and 6.7 m 25 % less or 1.7 m

      Operation

      Each tandem case fluid volume 68 l. and 18.9 l. 72 % more or 49.1 l.
      Hydraulic system fluid volume 114 l. and 53 l. 54 % more or 61 l.

      Motor

      Power measured at 2500 rev / min and 2300 rev / min 8 % more or 200 rev

      Hydraulic system

      Pump flow rate 91 l/min and 142 l/min 36 % less or 51 l/min

      Gear box

      Maximum reverse gear 32 km/h and 13.2 km/h 59 % more or 18.8 km/h

      Neutral reasons:

      Sizes

      Between tyres width 2390 mm and 2362 mm
      Wheelbase 5970 mm and 4674 mm
      Blade base 2670 mm and 1880 mm
      Dimensional length 8310 mm and 6350 mm

      Operation

      Tyre size 13.00-25 and 15X19.5, TL, G-2
      Overall standard operating weight 13166 kg and 7030 kg

      Motor

      Manufacturer John Deere and Cummins
      Model 6068T and 4B3.9

      Hydraulic system

      Type of pump variable displacement hydraulic pump and single stream

      Gear box

      Transmission type powershift and hydrostatic

      Front Axle

      Wheel tilt 20 degrees and 15 degrees
      General fluctuations 32 degrees and 35 degrees

      Dump

      Lateral right shift 683 mm and 1473.2 mm
      Mouldboard width 3.7 mm and 3048 mm
      Mouldboard height 610 mm and 482.6 mm
      Mouldboard thickness 22 mm and 15.9 mm
      Left lateral displacement 683 mm and 1473.2 mm

      Circle

      Diameter 1520 mm and 990.6 mm
      Rotating 360 degrees and 120 degrees

      Images

      Sizes

      1. Dimensional length 8310 mm 1. Dimensional length 6350 mm
      2. Between tyres width 2390 mm 2. Between tyres width 2362 mm
      4. Wheelbase 5970 mm 4. Wheelbase 4674 mm
      8. Blade base 2670 mm 8. Blade base 1880 mm