vs.

      John Deere 670C vs. Mitsubishi MG330-E

      11 reasons to buy John Deere 670C:

      Operation

      Circular gearbox fluid volume 3.8 l. and 3.5 l. 8 % more or 0.3 l.
      Each tandem case fluid volume 75 l. and 73 l. 3 % more or 2 l.
      Generator current strength 55 amperes and 40 amperes 27 % more or 15 amperes
      Fuel Capacity 403 l. and 230 l. 43 % more or 173 l.
      Oil system fluid volume 24 l. and 13 l. 46 % more or 11 l.
      Transmission fluid volume 38 l. and 23 l. 39 % more or 15 l.

      Motor

      Maximum power 104.4 kW and 100.7 kW 4 % more or 3.7 kW

      Gear box

      Reverse gears number 8 and 6 25 % more or 2
      Forward gears number 8 and 6 25 % more or 2

      Front Axle

      Clearance 610 mm and 555 mm 9 % more or 55 mm

      Circle

      Blade tilt front angle 49 degrees and 40 degrees 18 % more or 9 degrees

      7 reasons to buy Mitsubishi MG330-E:

      Operation

      Hydraulic system fluid volume 67 l. and 59 l. 12 % more or 8 l.

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Displacement 7.5 l. and 6.8 l. 9 % more or 0.7 l.

      Hydraulic system

      Pump flow rate 120 l/min and 173 l/min 31 % less or 53 l/min

      Gear box

      Maximum forward speed 42.6 km/h and 40.2 km/h 6 % more or 2.4 km/h
      Maximum reverse gear 43.3 km/h and 40.2 km/h 7 % more or 3.1 km/h

      Circle

      Maximum lifting above ground level 480 mm and 444 mm 7 % more or 36 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 26 degrees

      Sizes

      Height to cab upper part 3100 mm and 3130 mm
      Dimensional length 8580 mm and 7820 mm
      Between tyres width 2490 mm and 2450 mm
      Wheelbase 5970 mm and 5700 mm
      Blade base 2670 mm and 2500 mm

      Operation

      Tyre size 13.00-24 and 14.00-24-12
      Operating voltage 24 V and 24 V
      Overall standard operating weight 13832 kg and 15600 kg

      Motor

      Cylinders number 6 and 6
      Manufacturer John Deere and Mitsubishi
      Model 6068H and 6D16-TE1

      Hydraulic system

      Overflow valve pressure 17581.6 kPa and 17.2 kPa
      Type of pump variable displacement with locking in the middle position and Pump with double gear

      Gear box

      Transmission type powershift and planetary gear

      Front Axle

      Wheel tilt 20 degrees and 20 degrees
      General fluctuations 32 degrees and 30 degrees

      Dump

      Mouldboard width 3.7 mm and 3710 mm
      Mouldboard height 610 mm and 610 mm
      Mouldboard thickness 22 mm and 22 mm

      Circle

      Left shift 787 mm and 1890 mm
      Right shift 724 mm and 1900 mm
      Blade tilt rear angle 5 degrees and 5 degrees
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8580 mm 1. Dimensional length 7820 mm
      2. Between tyres width 2490 mm 2. Between tyres width 2450 mm
      3. Height to cab upper part 3100 mm 3. Height to cab upper part 3130 mm
      4. Wheelbase 5970 mm 4. Wheelbase 5700 mm
      8. Blade base 2670 mm 8. Blade base 2500 mm