vs.

      John Deere 670C vs. New Holland G200

      13 reasons to buy John Deere 670C:

      Steerage

      Turn radius 6.7 m and 7289 m 100 % less or 7282.3 m

      Operation

      Fuel Capacity 403 l. and 340.7 l. 15 % more or 62.3 l.
      Cooling system fluid volume 42 l. and 39.7 l. 5 % more or 2.3 l.
      Transmission fluid volume 38 l. and 22 l. 42 % more or 16 l.
      Rear differential/final drive fluid volume 36 l. and 12.1 l. 66 % more or 23.9 l.
      Circular gearbox fluid volume 3.8 l. and 2.8 l. 26 % more or 1.0 l.
      Each tandem case fluid volume 75 l. and 22.7 l. 70 % more or 52.3 l.

      Motor

      Displacement 6.8 l. and 6.7 l. 1 % more or 0.1 l.

      Hydraulic system

      Pump flow rate 173 l/min and 185.5 l/min 7 % less or 12.5 l/min

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum reverse gear 40.2 km/h and 30.6 km/h 24 % more or 9.6 km/h

      Circle

      Right maximum radius outside tyres 2110 mm and 2174 mm 3 % less or 64 mm
      Blade tilt front angle 49 degrees and 42 degrees 14 % more or 7 degrees

      14 reasons to buy New Holland G200:

      Sizes

      Front part clearance 622 mm and 610 mm 2 % more or 12 mm

      Operation

      Front axle standard operating weight 5102.9 kg and 3919 kg 23 % more or 1183.9 kg
      Hydraulic system fluid volume 179.8 l. and 59 l. 67 % more or 120.8 l.
      Rear axle standard operating weight 12014.8 kg and 9913 kg 17 % more or 2101.8 kg
      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Torque measured at 1600 rev / min and 1000 rev / min 37 % more or 600 rev
      Effective speeds output 7-8 152.9 kW and 104.4 kW 32 % more or 48.5 kW
      Maximum power 152.9 kW and 104.4 kW 32 % more or 48.5 kW
      Effective drives torque 7-8 881.3 Nm and 672.5 Nm 24 % more or 208.8 Nm

      Gear box

      Maximum forward speed 43 km/h and 40.2 km/h 7 % more or 2.8 km/h

      Front Axle

      Clearance 622 mm and 610 mm 2 % more or 12 mm

      Circle

      Maximum radius outside left tyres 1978 mm and 2160 mm 8 % less or 182 mm
      Maximum lifting above ground level 445 mm and 444 mm 0 % more or 1 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Height to cab upper part 3100 mm and 3140 mm
      Dimensional length 8580 mm and 8555 mm
      Between tyres width 2490 mm and 2650 mm
      Wheelbase 5970 mm and 6219 mm
      Blade base 2670 mm and 2562 mm
      Dual axis wheelbase 1540 mm and 1602 mm

      Operation

      Overall standard operating weight 13832 kg and 17117.7 kg
      Tyre size 13.00-24 and 14.00x24 10 layers G2
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer John Deere and Cummins
      Model 6068H and QSB 6.7L
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump variable displacement with locking in the middle position and variable displacement piston pump
      Overflow valve pressure 17581.6 kPa and 17926.4 kPa

      Gear box

      Forward gears number 8 and 8
      Transmission type powershift and Powershift transmission with direct drive

      Front Axle

      Wheel tilt 20 degrees and 17.5 degrees
      General fluctuations 32 degrees and 19 degrees

      Dump

      Lateral right shift 683 mm and 711 mm
      Mouldboard thickness 22 mm and 22 mm
      Left lateral displacement 683 mm and 533 mm
      Mouldboard width 3.7 mm and 4267.2 mm
      Mouldboard height 610 mm and 622 mm

      Circle

      Blade tilt rear angle 5 degrees and 5 degrees
      Diameter 1520 mm and 1753 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      2. Between tyres width 2490 mm 2. Between tyres width 2650 mm
      3. Height to cab upper part 3100 mm 3. Height to cab upper part 3140 mm
      4. Wheelbase 5970 mm 4. Wheelbase 6219 mm
      6. Front part clearance 610 mm 6. Front part clearance 622 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1602 mm
      8. Blade base 2670 mm 8. Blade base 2562 mm
      1. Dimensional length 8580 mm 1. Dimensional length 8555 mm