vs.

      John Deere 670D vs. Caterpillar 160M

      11 reasons to buy John Deere 670D:

      Steerage

      Turn radius 7 m and 7.6 m 8 % less or 0.6 m

      Sizes

      Front part clearance 638 mm and 600 mm 6 % more or 38 mm

      Operation

      Fuel Capacity 401.2 l. and 398 l. 1 % more or 3.2 l.
      Cooling system fluid volume 45.4 l. and 40 l. 12 % more or 5.4 l.

      Hydraulic system

      Pump flow rate 207 l/min and 210 l/min 1 % less or 3 l/min

      Gear box

      Reverse gears number 8 and 6 25 % more or 2
      Maximum reverse gear 40 km/h and 37.4 km/h 6 % more or 2.6 km/h

      Front Axle

      Clearance 638 mm and 600 mm 6 % more or 38 mm

      Circle

      Right maximum radius outside tyres 2080 mm and 2278 mm 9 % less or 198 mm
      Maximum lifting above ground level 470 mm and 452 mm 4 % more or 18 mm
      Blade tilt front angle 42 degrees and 40 degrees 5 % more or 2 degrees

      16 reasons to buy Caterpillar 160M:

      Operation

      Front axle maximum operating weight 8382 kg and 4413 kg 47 % more or 3969 kg
      Rear axle maximum operating weight 15565 kg and 12728 kg 18 % more or 2837 kg
      Hydraulic system fluid volume 64 l. and 53 l. 17 % more or 11 l.
      Rear differential/final drive fluid volume 65 l. and 36 l. 45 % more or 29 l.
      Circular gearbox fluid volume 7 l. and 5.7 l. 19 % more or 1.3 l.
      Each tandem case fluid volume 80 l. and 75.7 l. 5 % more or 4.3 l.
      Front axle standard operating weight 4389 kg and 3855 kg 12 % more or 534 kg
      Rear axle standard operating weight 11514 kg and 10663 kg 7 % more or 851 kg

      Motor

      Torque measured at 2000 rev / min and 1000 rev / min 50 % more or 1000 rev
      Effective speeds output 7-8 158.8 kW and 138 kW 13 % more or 20.8 kW
      Maximum power 158.8 kW and 138 kW 13 % more or 20.8 kW
      Effective drives torque 7-8 1237 Nm and 847 Nm 32 % more or 390 Nm
      Displacement 8.8 l. and 6.8 l. 23 % more or 2.0 l.

      Gear box

      Maximum forward speed 47.4 km/h and 40 km/h 16 % more or 7.4 km/h

      Dump

      Blade pulling at maximum weight 18693 kg and 12800 kg 32 % more or 5893 kg

      Circle

      Maximum radius outside left tyres 2090 mm and 2100 mm 0 % less or 10 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 20 degrees

      Sizes

      Blade base 2568 mm and 2609 mm
      Dual axis wheelbase 1540 mm and 1523 mm
      Height to cab upper part 3180 mm and 3293 mm
      Dimensional length 8804 mm and 8713 mm
      Between tyres width 2510 mm and 2493 mm
      Wheelbase 6120 mm and 6121 mm

      Operation

      Overall standard operating weight 14519 kg and 15903 kg
      Total maximum operating weight 17141 kg and 23947 kg

      Motor

      Power measured at 2000 rev / min and 2000 rev / min
      Manufacturer John Deere and Caterpillar
      Model 6068H and C9 ACERT VHP
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump variable displacement piston pump and variable displacement piston pump
      Overflow valve pressure 18960.6 kPa and 24150 kPa

      Gear box

      Transmission type Powershift transmission with direct drive and direct drive, powershift, camshaft
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 20 degrees and 18 degrees
      General fluctuations 32 degrees and 32 degrees

      Dump

      Left lateral displacement 680 mm and 820 mm
      Lateral right shift 680 mm and 950 mm
      Mouldboard width 3660 mm and 4300 mm
      Mouldboard height 610 mm and 686 mm
      Mouldboard thickness 22 mm and 25 mm

      Circle

      Right shift 724 mm and 728 mm
      Diameter 1524 mm and 1553 mm
      Left shift 787 mm and 695 mm
      Blade tilt rear angle 5 degrees and 5 degrees

      Images

      Sizes

      1. Dimensional length 8804 mm 1. Dimensional length 8713 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2493 mm
      3. Height to cab upper part 3180 mm 3. Height to cab upper part 3293 mm
      4. Wheelbase 6120 mm 4. Wheelbase 6121 mm
      6. Front part clearance 638 mm 6. Front part clearance 600 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1523 mm
      8. Blade base 2568 mm 8. Blade base 2609 mm