vs.

      John Deere 672A vs. John Deere JD570A

      16 reasons to buy John Deere 672A:

      Operation

      Circular gearbox fluid volume 2.8 l. and 1.4 l. 50 % more or 1.4 l.
      Front axle maximum operating weight 4140 kg and 3063 kg 26 % more or 1077 kg
      Rear axle maximum operating weight 9855 kg and 6418 kg 35 % more or 3437 kg
      Fuel Capacity 227 l. and 189.3 l. 17 % more or 37.7 l.
      Oil system fluid volume 18.9 l. and 11.4 l. 40 % more or 7.5 l.
      Cooling system fluid volume 26.5 l. and 21.2 l. 20 % more or 5.3 l.
      Front axle standard operating weight 3947 kg and 2608 kg 34 % more or 1339 kg
      Hydraulic system fluid volume 143.8 l. and 79.5 l. 45 % more or 64.3 l.
      Rear axle standard operating weight 8460 kg and 6495 kg 23 % more or 1965 kg

      Motor

      Effective speeds output 7-8 93.2 kW and 63.4 kW 32 % more or 29.8 kW
      Maximum power 93.2 kW and 68.6 kW 26 % more or 24.6 kW
      Effective drives torque 7-8 504.4 Nm and 322.7 Nm 36 % more or 181.7 Nm
      Displacement 6.8 l. and 5.4 l. 21 % more or 1.4 l.

      Gear box

      Maximum forward speed 38.5 km/h and 34.8 km/h 10 % more or 3.7 km/h
      Maximum reverse gear 12.2 km/h and 11.4 km/h 7 % more or 0.8 km/h

      Circle

      Maximum lifting above ground level 409 mm and 330 mm 19 % more or 79 mm

      4 reasons to buy John Deere JD570A:

      Steerage

      Turn radius 5.5 m and 6.9 m 20 % less or 1.4 m

      Sizes

      Front part clearance 582 mm and 559 mm 4 % more or 23 mm

      Hydraulic system

      Pump flow rate 102 l/min and 142.3 l/min 28 % less or 40.3 l/min

      Front Axle

      Clearance 597 mm and 559 mm 6 % more or 38 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 22 degrees

      Sizes

      Height to cab upper part 3200 mm and 3200 mm
      Dimensional length 8310 mm and 7430 mm
      Between tyres width 2390 mm and 2410 mm
      Wheelbase 5970 mm and 5280 mm
      Blade base 2540 mm and 2340 mm
      Dual axis wheelbase 1540 mm and 1440 mm

      Operation

      Overall standard operating weight 12407 kg and 9083 kg
      Each tandem case fluid volume 18.9 l. and 18.9 l.
      Tyre size 13.00-24 and 13.00-24
      Total maximum operating weight 13995 kg and 9481 kg
      Operating voltage 25 V and 12 V

      Motor

      Cylinders number 6 and 6
      Manufacturer John Deere and John Deere
      Aspiration turbocharging and turbocharging
      Power measured at 2300 rev / min and 2300 rev / min
      Torque measured at 1300 rev / min and 1300 rev / min

      Gear box

      Transmission type powershift transmission and powershift
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 20 degrees and 20 degrees
      General fluctuations 30 degrees and 30 degrees

      Dump

      Mouldboard width 3.7 mm and 3.7 mm
      Mouldboard height 610 mm and 559 mm
      Mouldboard thickness 22 mm and 15.8 mm
      Left lateral displacement 683 mm and 794 mm
      Lateral right shift 683 mm and 679 mm

      Circle

      Diameter 1.5 mm and 1370 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8310 mm 1. Dimensional length 7430 mm
      2. Between tyres width 2390 mm 2. Between tyres width 2410 mm
      3. Height to cab upper part 3200 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 5970 mm 4. Wheelbase 5280 mm
      6. Front part clearance 559 mm 6. Front part clearance 582 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1440 mm
      8. Blade base 2540 mm 8. Blade base 2340 mm