vs.

      John Deere 672CH vs. Caterpillar 160H

      11 reasons to buy John Deere 672CH:

      Steerage

      Turn radius 6.9 m and 7.4 m 7 % less or 0.5 m

      Operation

      Generator current strength 55 amperes and 35 amperes 36 % more or 20 amperes
      Fuel Capacity 403 l. and 397 l. 1 % more or 6 l.
      Cooling system fluid volume 42 l. and 38 l. 10 % more or 4 l.
      Each tandem case fluid volume 75 l. and 64 l. 15 % more or 11 l.

      Hydraulic system

      Pump flow rate 173 l/min and 260 l/min 33 % less or 87 l/min

      Gear box

      Reverse gears number 8 and 6 25 % more or 2
      Maximum reverse gear 40.2 km/h and 34.4 km/h 14 % more or 5.8 km/h

      Circle

      Maximum radius outside left tyres 2160 mm and 2223 mm 3 % less or 63 mm
      Right maximum radius outside tyres 2110 mm and 2261 mm 7 % less or 151 mm
      Blade tilt front angle 49 degrees and 40 degrees 18 % more or 9 degrees

      17 reasons to buy Caterpillar 160H:

      Operation

      Front axle standard operating weight 4589 kg and 4563 kg 1 % more or 26 kg
      Rear axle standard operating weight 11691 kg and 10095 kg 14 % more or 1596 kg
      Front axle maximum operating weight 8311 kg and 5071 kg 39 % more or 3240 kg
      Rear axle maximum operating weight 14970 kg and 11732 kg 22 % more or 3238 kg
      Rear differential/final drive fluid volume 47 l. and 36 l. 23 % more or 11 l.
      Hydraulic system fluid volume 80 l. and 59 l. 26 % more or 21 l.
      Circular gearbox fluid volume 7 l. and 3.8 l. 46 % more or 3.2 l.

      Motor

      Maximum power 149.1 kW and 147.6 kW 1 % more or 1.5 kW
      Effective drives torque 7-8 1140 Nm and 847.4 Nm 26 % more or 292.6 Nm
      Displacement 10.3 l. and 6.8 l. 34 % more or 3.5 l.
      Effective speeds output 1-2 134.2 kW and 108 kW 20 % more or 26.2 kW
      Effective speeds output 3-4 149.1 kW and 132.7 kW 11 % more or 16.4 kW
      Effective speeds output 5-6 149.1 kW and 147.6 kW 1 % more or 1.5 kW
      Effective speeds output 7-8 149.1 kW and 147.6 kW 1 % more or 1.5 kW

      Gear box

      Maximum forward speed 43.6 km/h and 40.2 km/h 8 % more or 3.4 km/h

      Dump

      Blade pulling at maximum weight 20071 kg and 17827 kg 11 % more or 2244 kg

      Circle

      Maximum lifting above ground level 452 mm and 444 mm 2 % more or 8 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 20 degrees

      Sizes

      Wheelbase 5970 mm and 6169 mm
      Height to cab upper part 3100 mm and 3356 mm
      Dimensional length 8580 mm and 10097 mm
      Dual axis wheelbase 1540 mm and 1523 mm
      Between tyres width 2460 mm and 2460 mm

      Operation

      Operating voltage 24 V and 24 V
      Overall standard operating weight 14658 kg and 16280 kg
      Total maximum operating weight 16803 kg and 23281 kg
      Tyre size 13.00-24 and 10-24 12PR

      Motor

      Manufacturer John Deere and Caterpillar
      Model 6068H and 3176C ATAAC
      Power measured at 2000 rev / min and 2000 rev / min
      Torque measured at 1000 rev / min and 1000 rev / min
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump Closed center variable displacement piston pump and Axial-piston pump
      Overflow valve pressure 17581.6 kPa and 24150 kPa

      Gear box

      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 20 degrees and 18 degrees
      General fluctuations 32 degrees and 32 degrees

      Dump

      Mouldboard thickness 22 mm and 25 mm
      Left lateral displacement 683 mm and 851 mm
      Lateral right shift 683 mm and 943 mm
      Mouldboard width 3.7 mm and 4267 mm
      Mouldboard height 610 mm and 686 mm

      Circle

      Blade tilt rear angle 5 degrees and 5 degrees
      Left shift 787 mm and 848 mm
      Right shift 724 mm and 881 mm

      Images

      Sizes

      1. Dimensional length 8580 mm 1. Dimensional length 10097 mm
      2. Between tyres width 2460 mm 2. Between tyres width 2460 mm
      3. Height to cab upper part 3100 mm 3. Height to cab upper part 3356 mm
      4. Wheelbase 5970 mm 4. Wheelbase 6169 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1523 mm