vs.

      John Deere 672CH vs. Caterpillar NO.14E

      13 reasons to buy John Deere 672CH:

      Steerage

      Turn radius 6.9 m and 11.6 m 41 % less or 4.7 m

      Operation

      Fuel Capacity 403 l. and 285 l. 29 % more or 118 l.
      Hydraulic system fluid volume 59 l. and 32 l. 46 % more or 27 l.
      Rear differential/final drive fluid volume 36 l. and 35 l. 3 % more or 1 l.
      Rear axle standard operating weight 10095 kg and 9700 kg 4 % more or 395 kg
      Each tandem case fluid volume 75 l. and 47 l. 37 % more or 28 l.

      Motor

      Effective speeds output 5-6 147.6 kW and 111.9 kW 24 % more or 35.7 kW
      Maximum power 147.6 kW and 111.9 kW 24 % more or 35.7 kW

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 8 and 6 25 % more or 2
      Maximum forward speed 40.2 km/h and 39.1 km/h 3 % more or 1.1 km/h

      Circle

      Right maximum radius outside tyres 2110 mm and 2440 mm 14 % less or 330 mm
      Maximum radius outside left tyres 2160 mm and 2440 mm 11 % less or 280 mm

      9 reasons to buy Caterpillar NO.14E:

      Operation

      Cooling system fluid volume 47 l. and 42 l. 11 % more or 5 l.
      Transmission fluid volume 76 l. and 38 l. 50 % more or 38 l.
      Front axle standard operating weight 4600 kg and 4563 kg 1 % more or 37 kg

      Motor

      Displacement 10.5 l. and 6.8 l. 35 % more or 3.7 l.

      Gear box

      Maximum reverse gear 47.3 km/h and 40.2 km/h 15 % more or 7.1 km/h

      Front Axle

      Clearance 580 mm and 559 mm 4 % more or 21 mm

      Circle

      Maximum lifting above ground level 460 mm and 444 mm 3 % more or 16 mm
      Blade tilt front angle 90 degrees and 49 degrees 46 % more or 41 degrees
      Blade tilt rear angle 90 degrees and 5 degrees 94 % more or 85 degrees

      Neutral reasons:

      Sizes

      Height to cab upper part 3100 mm and 3250 mm
      Dimensional length 8580 mm and 8300 mm
      Between tyres width 2460 mm and 2440 mm
      Wheelbase 5970 mm and 6100 mm
      Blade base 2670 mm and 2750 mm
      Dual axis wheelbase 1540 mm and 1520 mm

      Operation

      Operating voltage 24 V and 24 V
      Overall standard operating weight 14658 kg and 14300 kg
      Tyre size 13.00-24 and 14-24 10PR

      Motor

      Manufacturer John Deere and Caterpillar
      Power measured at 2000 rev / min and 2000 rev / min
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump Closed center variable displacement piston pump and Hermetic

      Gear box

      Transmission type powershift and powershift transmission

      Front Axle

      Wheel tilt 20 degrees and 22 degrees
      General fluctuations 32 degrees and 31 degrees

      Circle

      Diameter 1520 mm and 1650 mm
      Rotating 360 degrees and 180 degrees
      Left shift 787 mm and 1040 mm
      Right shift 724 mm and 940 mm

      Images

      Sizes

      1. Dimensional length 8580 mm 1. Dimensional length 8300 mm
      2. Between tyres width 2460 mm 2. Between tyres width 2440 mm
      3. Height to cab upper part 3100 mm 3. Height to cab upper part 3250 mm
      4. Wheelbase 5970 mm 4. Wheelbase 6100 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1520 mm
      8. Blade base 2670 mm 8. Blade base 2750 mm