vs.

      John Deere 672CH vs. Fiat-Hitachi FG105

      16 reasons to buy John Deere 672CH:

      Steerage

      Turn radius 6.9 m and 10 m 31 % less or 3.1 m

      Operation

      Fuel Capacity 403 l. and 299 l. 26 % more or 104 l.
      Oil system fluid volume 24 l. and 20.3 l. 15 % more or 3.7 l.
      Cooling system fluid volume 42 l. and 27 l. 36 % more or 15 l.
      Transmission fluid volume 38 l. and 25 l. 34 % more or 13 l.
      Circular gearbox fluid volume 3.8 l. and 2.8 l. 26 % more or 1.0 l.
      Each tandem case fluid volume 75 l. and 30.3 l. 60 % more or 44.7 l.
      Front axle maximum operating weight 5071 kg and 4210 kg 17 % more or 861 kg
      Rear axle maximum operating weight 11732 kg and 11390 kg 3 % more or 342 kg
      Generator current strength 55 amperes and 45 amperes 18 % more or 10 amperes

      Motor

      Effective speeds output 5-6 147.6 kW and 147 kW 0 % more or 0.6 kW
      Maximum power 147.6 kW and 147 kW 0 % more or 0.6 kW
      Effective drives torque 7-8 847.4 Nm and 753 Nm 11 % more or 94.4 Nm

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 8 and 3 62 % more or 5
      Maximum reverse gear 40.2 km/h and 27.4 km/h 32 % more or 12.8 km/h

      13 reasons to buy Fiat-Hitachi FG105:

      Sizes

      Front part clearance 635 mm and 559 mm 12 % more or 76 mm

      Operation

      Hydraulic system fluid volume 94.6 l. and 59 l. 38 % more or 35.6 l.
      Rear differential/final drive fluid volume 42 l. and 36 l. 14 % more or 6 l.

      Motor

      Displacement 8.3 l. and 6.8 l. 18 % more or 1.5 l.
      Power measured at 2300 rev / min and 2000 rev / min 13 % more or 300 rev
      Torque measured at 1500 rev / min and 1000 rev / min 33 % more or 500 rev

      Hydraulic system

      Pump flow rate 163 l/min and 173 l/min 6 % less or 10 l/min

      Gear box

      Maximum forward speed 42 km/h and 40.2 km/h 4 % more or 1.8 km/h

      Front Axle

      Clearance 635 mm and 559 mm 12 % more or 76 mm

      Circle

      Maximum radius outside left tyres 1759 mm and 2160 mm 19 % less or 401 mm
      Right maximum radius outside tyres 2057 mm and 2110 mm 3 % less or 53 mm
      Maximum lifting above ground level 622 mm and 444 mm 29 % more or 178 mm
      Blade tilt rear angle 27.5 degrees and 5 degrees 82 % more or 22.5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Height to cab upper part 3100 mm and 3340 mm
      Dimensional length 8580 mm and 8521 mm
      Between tyres width 2460 mm and 2540 mm
      Wheelbase 5970 mm and 1538 mm
      Blade base 2670 mm and 2642 mm
      Dual axis wheelbase 1540 mm and 5969 mm

      Operation

      Tyre size 13.00-24 and 13X24(10PR)
      Operating voltage 24 V and 24 V
      Total maximum operating weight 16803 kg and 15600 kg

      Motor

      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging
      Manufacturer John Deere and Cummins
      Model 6068H and 6 CT8.3
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump Closed center variable displacement piston pump and fully oil-actuated, variable displacement piston pump
      Overflow valve pressure 17581.6 kPa and 2857 kPa

      Gear box

      Transmission type powershift and powershift transmission

      Front Axle

      Wheel tilt 20 degrees and 17.5 degrees
      General fluctuations 32 degrees and 19 degrees

      Dump

      Mouldboard width 3.7 mm and 2762 mm
      Mouldboard height 610 mm and 953 mm
      Left lateral displacement 683 mm and 533 mm
      Lateral right shift 683 mm and 685 mm

      Circle

      Diameter 1520 mm and 1753 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8580 mm 1. Dimensional length 8521 mm
      2. Between tyres width 2460 mm 2. Between tyres width 2540 mm
      3. Height to cab upper part 3100 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 5970 mm 4. Wheelbase 1538 mm
      6. Front part clearance 559 mm 6. Front part clearance 635 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 5969 mm
      8. Blade base 2670 mm 8. Blade base 2642 mm