vs.

      John Deere 672CH vs. John Deere JD670

      18 reasons to buy John Deere 672CH:

      Operation

      Rear axle maximum operating weight 11732 kg and 9741 kg 17 % more or 1991 kg
      Cooling system fluid volume 42 l. and 26.5 l. 37 % more or 15.5 l.
      Fuel Capacity 403 l. and 227 l. 44 % more or 176 l.
      Circular gearbox fluid volume 3.8 l. and 2.8 l. 26 % more or 1.0 l.
      Oil system fluid volume 24 l. and 18.9 l. 21 % more or 5.1 l.
      Each tandem case fluid volume 75 l. and 15.1 l. 80 % more or 59.9 l.
      Front axle standard operating weight 4563 kg and 3471 kg 24 % more or 1092 kg
      Rear axle standard operating weight 10095 kg and 8245 kg 18 % more or 1850 kg
      Front axle maximum operating weight 5071 kg and 3615 kg 29 % more or 1456 kg

      Motor

      Effective speeds output 7-8 147.6 kW and 93.2 kW 37 % more or 54.4 kW
      Maximum power 147.6 kW and 93.2 kW 37 % more or 54.4 kW
      Effective drives torque 7-8 847.4 Nm and 504.4 Nm 40 % more or 343.0 Nm

      Gear box

      Maximum reverse gear 40.2 km/h and 12.3 km/h 69 % more or 27.9 km/h
      Reverse gears number 8 and 4 50 % more or 4
      Maximum forward speed 40.2 km/h and 38.4 km/h 4 % more or 1.8 km/h

      Circle

      Right maximum radius outside tyres 2110 mm and 2130 mm 1 % less or 20 mm
      Maximum lifting above ground level 444 mm and 409 mm 8 % more or 35 mm
      Blade tilt front angle 49 degrees and 35 degrees 29 % more or 14 degrees

      6 reasons to buy John Deere JD670:

      Steerage

      Turn radius 6.7 m and 6.9 m 3 % less or 0.2 m

      Operation

      Hydraulic system fluid volume 106 l. and 59 l. 44 % more or 47 l.

      Motor

      Power measured at 2300 rev / min and 2000 rev / min 13 % more or 300 rev
      Torque measured at 1300 rev / min and 1000 rev / min 23 % more or 300 rev

      Hydraulic system

      Pump flow rate 132 l/min and 173 l/min 24 % less or 41 l/min

      Circle

      Maximum radius outside left tyres 2130 mm and 2160 mm 1 % less or 30 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Blade base 2670 mm and 2540 mm
      Dual axis wheelbase 1540 mm and 1540 mm
      Front part clearance 559 mm and 559 mm
      Height to cab upper part 3100 mm and 3200 mm
      Dimensional length 8580 mm and 8310 mm
      Between tyres width 2460 mm and 2340 mm
      Wheelbase 5970 mm and 5970 mm

      Operation

      Total maximum operating weight 16803 kg and 13356 kg
      Tyre size 13.00-24 and 13.00-24
      Operating voltage 24 V and 24 V
      Overall standard operating weight 14658 kg and 11716 kg

      Motor

      Manufacturer John Deere and John Deere
      Displacement 6.8 l. and 6.8 l.
      Cylinders number 6 and 6
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging

      Hydraulic system

      Type of pump Closed center variable displacement piston pump and Variable displacement with locking in the middle position
      Overflow valve pressure 17581.6 kPa and 15513.2 kPa

      Gear box

      Transmission type powershift and powershift
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 20 degrees and 20 degrees
      General fluctuations 32 degrees and 30 degrees
      Clearance 559 mm and 559 mm

      Dump

      Left lateral displacement 683 mm and 683 mm
      Lateral right shift 683 mm and 683 mm
      Mouldboard width 3.7 mm and 3.7 mm
      Mouldboard height 610 mm and 610 mm
      Mouldboard thickness 22 mm and 22 mm

      Circle

      Diameter 1520 mm and 1470 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8580 mm 1. Dimensional length 8310 mm
      2. Between tyres width 2460 mm 2. Between tyres width 2340 mm
      3. Height to cab upper part 3100 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 5970 mm 4. Wheelbase 5970 mm
      6. Front part clearance 559 mm 6. Front part clearance 559 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2670 mm 8. Blade base 2540 mm