vs.

      John Deere 672CH vs. Volvo G960

      9 reasons to buy John Deere 672CH:

      Steerage

      Turn radius 6.9 m and 7265 m 100 % less or 7258.1 m

      Operation

      Oil system fluid volume 24 l. and 21.5 l. 10 % more or 2.5 l.
      Cooling system fluid volume 42 l. and 34 l. 19 % more or 8 l.

      Motor

      Power measured at 2000 rev / min and 1800 rev / min 10 % more or 200 rev

      Hydraulic system

      Pump flow rate 173 l/min and 208 l/min 17 % less or 35 l/min

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum reverse gear 40.2 km/h and 32 km/h 20 % more or 8.2 km/h

      Dump

      Blade pulling at maximum weight 17827 kg and 12861 kg 28 % more or 4966 kg

      Circle

      Blade tilt front angle 49 degrees and 45 degrees 8 % more or 4 degrees

      19 reasons to buy Volvo G960:

      Operation

      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes
      Front axle standard operating weight 5100 kg and 4563 kg 11 % more or 537 kg
      Rear axle standard operating weight 12450 kg and 10095 kg 19 % more or 2355 kg
      Front axle maximum operating weight 7570 kg and 5071 kg 33 % more or 2499 kg
      Rear axle maximum operating weight 14290 kg and 11732 kg 18 % more or 2558 kg
      Fuel Capacity 404 l. and 403 l. 0 % more or 1 l.
      Hydraulic system fluid volume 91 l. and 59 l. 35 % more or 32 l.
      Transmission fluid volume 61 l. and 38 l. 38 % more or 23 l.
      Each tandem case fluid volume 100 l. and 75 l. 25 % more or 25 l.

      Motor

      Torque measured at 1500 rev / min and 1000 rev / min 33 % more or 500 rev
      Effective speeds output 7-8 180.5 kW and 147.6 kW 18 % more or 32.9 kW
      Maximum power 180.5 kW and 147.6 kW 18 % more or 32.9 kW
      Effective drives torque 7-8 1073 Nm and 847.4 Nm 21 % more or 225.6 Nm
      Displacement 7.2 l. and 6.8 l. 6 % more or 0.4 l.

      Gear box

      Maximum forward speed 45.4 km/h and 40.2 km/h 11 % more or 5.2 km/h

      Front Axle

      Clearance 610 mm and 559 mm 8 % more or 51 mm

      Circle

      Maximum radius outside left tyres 2020 mm and 2160 mm 6 % less or 140 mm
      Right maximum radius outside tyres 2010 mm and 2110 mm 5 % less or 100 mm
      Blade tilt rear angle 6 degrees and 5 degrees 17 % more or 1 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 23 degrees

      Sizes

      Wheelbase 5970 mm and 6280 mm
      Height to cab upper part 3100 mm and 3225 mm
      Dimensional length 8580 mm and 9150 mm
      Blade base 2670 mm and 2650 mm
      Between tyres width 2460 mm and 2537 mm

      Operation

      Overall standard operating weight 14658 kg and 17550 kg
      Total maximum operating weight 16803 kg and 21860 kg
      Tyre size 13.00-24 and 14:00 x 24, G-2
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer John Deere and Volvo
      Model 6068H and D7E
      Cylinders number 6 and 6
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharging with subsequent air cooling (by a cooling radiator)

      Hydraulic system

      Type of pump Closed center variable displacement piston pump and axial piston pump
      Overflow valve pressure 17581.6 kPa and 20684.3 kPa

      Gear box

      Transmission type powershift and HTE 840, Sequential direct drive gearbox with shifting under load Volvo
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 20 degrees and 18 degrees
      General fluctuations 32 degrees and 16 degrees

      Dump

      Left lateral displacement 683 mm and 673 mm
      Lateral right shift 683 mm and 673 mm
      Mouldboard width 3.7 mm and 3657.6 mm
      Mouldboard height 610 mm and 635 mm
      Mouldboard thickness 22 mm and 22 mm

      Circle

      Rotating 360 degrees and 360 degrees
      Left shift 787 mm and 775 mm
      Right shift 724 mm and 749 mm
      Diameter 1520 mm and 1626 mm

      Images

      Sizes

      1. Dimensional length 8580 mm 1. Dimensional length 9150 mm
      2. Between tyres width 2460 mm 2. Between tyres width 2537 mm
      3. Height to cab upper part 3100 mm 3. Height to cab upper part 3225 mm
      4. Wheelbase 5970 mm 4. Wheelbase 6280 mm
      8. Blade base 2670 mm 8. Blade base 2650 mm