- Home/
- Comparison/
- Grader/
- John Deere 672D vs. Caterpillar 120H
John Deere 672D vs. Caterpillar 120H
15 reasons to buy John Deere 672D:
Operation
Cooling system fluid volume | 45.4 l. and 40 l. | 12 % more or 5.4 l. |
Each tandem case fluid volume | 75.7 l. and 49 l. | 35 % more or 26.7 l. |
Generator current strength | 100 amperes and 35 amperes | 65 % more or 65 amperes |
Front axle standard operating weight | 4358 kg and 3574.3 kg | 18 % more or 783.7 kg |
Rear axle standard operating weight | 10895 kg and 8944.8 kg | 18 % more or 1950.2 kg |
Fuel Capacity | 401.2 l. and 340 l. | 15 % more or 61.2 l. |
Motor
Effective speeds output 3-4 | 123 kW and 93.2 kW | 24 % more or 29.8 kW |
Effective speeds output 7-8 | 138 kW and 104.4 kW | 24 % more or 33.6 kW |
Maximum power | 138 kW and 104.4 kW | 24 % more or 33.6 kW |
Displacement | 6.8 l. and 6.6 l. | 3 % more or 0.2 l. |
Gear box
Reverse gears number | 8 and 6 | 25 % more or 2 |
Maximum reverse gear | 40 km/h and 33.7 km/h | 16 % more or 6.3 km/h |
Dump
Blade pulling at maximum weight | 19105 kg and 10661 kg | 44 % more or 8444 kg |
Circle
Maximum lifting above ground level | 470 mm and 457 mm | 3 % more or 13 mm |
Blade tilt front angle | 42 degrees and 40 degrees | 5 % more or 2 degrees |
10 reasons to buy Caterpillar 120H:
Sizes
Front part clearance | 608 mm and 587 mm | 3 % more or 21 mm |
Operation
Circular gearbox fluid volume | 7 l. and 5.7 l. | 19 % more or 1.3 l. |
Hydraulic system fluid volume | 68 l. and 53 l. | 22 % more or 15 l. |
Rear differential/final drive fluid volume | 47 l. and 36 l. | 23 % more or 11 l. |
Motor
Torque measured at | 1400 rev / min and 1000 rev / min | 29 % more or 400 rev |
Hydraulic system
Pump flow rate | 148 l/min and 207 l/min | 29 % less or 59 l/min |
Gear box
Maximum forward speed | 42.6 km/h and 40 km/h | 6 % more or 2.6 km/h |
Front Axle
Clearance | 608 mm and 587 mm | 3 % more or 21 mm |
Circle
Maximum radius outside left tyres | 1840 mm and 2100 mm | 12 % less or 260 mm |
Right maximum radius outside tyres | 1912 mm and 2080 mm | 8 % less or 168 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 22 degrees and 20 degrees |
Turn radius | 7.2 m and 7.2 m |
Sizes
Dual axis wheelbase | 1540 mm and 1510 mm |
Height to cab upper part | 3180 mm and 3110 mm |
Dimensional length | 8804 mm and 8140 mm |
Between tyres width | 2490 mm and 2440 mm |
Wheelbase | 6120 mm and 5870 mm |
Operation
Tyre size | 14.00R24 Radial PR and 13-24 (10 PR) (G-2) |
Operating voltage | 24 V and 24 V |
Overall standard operating weight | 15254 kg and 11358 kg |
Motor
Power measured at | 2000 rev / min and 2000 rev / min |
Cylinders number | 6 and 6 |
Aspiration | Turbocharged engine with subsequent cooling of charging air by oncoming air flow and turbocharging |
Manufacturer | John Deere and Caterpillar |
Model | 6068H and 3116 DITA |
Hydraulic system
Overflow valve pressure | 18960.6 kPa and 24131.6 kPa |
Type of pump | variable displacement piston pump and Axial-piston pump |
Gear box
Forward gears number | 8 and 8 |
Transmission type | Powershift transmission with direct drive and direct drive, powershift |
Front Axle
Wheel tilt | 20 degrees and 18 degrees |
General fluctuations | 32 degrees and 32 degrees |
Dump
Lateral right shift | 680 mm and 660 mm |
Mouldboard width | 3660 mm and 3660 mm |
Mouldboard height | 610 mm and 610 mm |
Mouldboard thickness | 22 mm and 22 mm |
Left lateral displacement | 680 mm and 524 mm |
Circle
Diameter | 1520 mm and 1530 mm |
Rotating | 360 degrees and 360 degrees |
Left shift | 787 mm and 625 mm |
Blade tilt rear angle | 5 degrees and 5 degrees |
Right shift | 724 mm and 628 mm |
Images
Sizes
6. Front part clearance | 587 mm | 6. Front part clearance | 608 mm |
7. Dual axis wheelbase | 1540 mm | 7. Dual axis wheelbase | 1510 mm |
1. Dimensional length | 8804 mm | 1. Dimensional length | 8140 mm |
2. Between tyres width | 2490 mm | 2. Between tyres width | 2440 mm |
3. Height to cab upper part | 3180 mm | 3. Height to cab upper part | 3110 mm |
4. Wheelbase | 6120 mm | 4. Wheelbase | 5870 mm |