vs.

      John Deere 672D vs. John Deere JD670

      18 reasons to buy John Deere 672D:

      Sizes

      Front part clearance 587 mm and 559 mm 5 % more or 28 mm

      Operation

      Rear axle standard operating weight 10895 kg and 8245 kg 24 % more or 2650 kg
      Circular gearbox fluid volume 5.7 l. and 2.8 l. 51 % more or 2.9 l.
      Cooling system fluid volume 45.4 l. and 26.5 l. 42 % more or 18.9 l.
      Each tandem case fluid volume 75.7 l. and 15.1 l. 80 % more or 60.6 l.
      Fuel Capacity 401.2 l. and 227 l. 43 % more or 174.2 l.
      Front axle standard operating weight 4358 kg and 3471 kg 20 % more or 887 kg

      Motor

      Effective speeds output 7-8 138 kW and 93.2 kW 32 % more or 44.8 kW
      Maximum power 138 kW and 93.2 kW 32 % more or 44.8 kW
      Effective drives torque 7-8 847.4 Nm and 504.4 Nm 40 % more or 343.0 Nm

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum forward speed 40 km/h and 38.4 km/h 4 % more or 1.6 km/h
      Maximum reverse gear 40 km/h and 12.3 km/h 69 % more or 27.7 km/h

      Front Axle

      Clearance 587 mm and 559 mm 5 % more or 28 mm

      Circle

      Maximum radius outside left tyres 2100 mm and 2130 mm 1 % less or 30 mm
      Right maximum radius outside tyres 2080 mm and 2130 mm 2 % less or 50 mm
      Maximum lifting above ground level 470 mm and 409 mm 13 % more or 61 mm
      Blade tilt front angle 42 degrees and 35 degrees 17 % more or 7 degrees

      5 reasons to buy John Deere JD670:

      Steerage

      Turn radius 6.7 m and 7.2 m 7 % less or 0.5 m

      Operation

      Hydraulic system fluid volume 106 l. and 53 l. 50 % more or 53 l.

      Motor

      Torque measured at 1300 rev / min and 1000 rev / min 23 % more or 300 rev
      Power measured at 2300 rev / min and 2000 rev / min 13 % more or 300 rev

      Hydraulic system

      Pump flow rate 132 l/min and 207 l/min 36 % less or 75 l/min

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Dimensional length 8804 mm and 8310 mm
      Blade base 2568 mm and 2540 mm
      Between tyres width 2490 mm and 2340 mm
      Dual axis wheelbase 1540 mm and 1540 mm
      Wheelbase 6120 mm and 5970 mm
      Height to cab upper part 3180 mm and 3200 mm

      Operation

      Overall standard operating weight 15254 kg and 11716 kg
      Tyre size 14.00R24 Radial PR and 13.00-24
      Operating voltage 24 V and 24 V
      Total maximum operating weight 21228 kg and 13356 kg

      Motor

      Cylinders number 6 and 6
      Manufacturer John Deere and John Deere
      Displacement 6.8 l. and 6.8 l.
      Aspiration Turbocharged engine with subsequent cooling of charging air by oncoming air flow and turbocharging

      Hydraulic system

      Overflow valve pressure 18960.6 kPa and 15513.2 kPa
      Type of pump variable displacement piston pump and Variable displacement with locking in the middle position

      Gear box

      Transmission type Powershift transmission with direct drive and powershift
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 20 degrees and 20 degrees
      General fluctuations 32 degrees and 30 degrees

      Dump

      Mouldboard width 3660 mm and 3.7 mm
      Mouldboard height 610 mm and 610 mm
      Mouldboard thickness 22 mm and 22 mm
      Left lateral displacement 680 mm and 683 mm
      Lateral right shift 680 mm and 683 mm

      Circle

      Diameter 1520 mm and 1470 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      4. Wheelbase 6120 mm 4. Wheelbase 5970 mm
      6. Front part clearance 587 mm 6. Front part clearance 559 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2568 mm 8. Blade base 2540 mm
      1. Dimensional length 8804 mm 1. Dimensional length 8310 mm
      2. Between tyres width 2490 mm 2. Between tyres width 2340 mm
      3. Height to cab upper part 3180 mm 3. Height to cab upper part 3200 mm