vs.

      John Deere 672D vs. Komatsu GD505A-2

      11 reasons to buy John Deere 672D:

      Sizes

      Front part clearance 587 mm and 550 mm 6 % more or 37 mm

      Operation

      Front axle standard operating weight 4358 kg and 2960 kg 32 % more or 1398 kg
      Rear axle standard operating weight 10895 kg and 7920 kg 27 % more or 2975 kg

      Motor

      Effective speeds output 5-6 138 kW and 96.9 kW 30 % more or 41.1 kW
      Maximum power 138 kW and 96.9 kW 30 % more or 41.1 kW
      Effective drives torque 5-6 847.4 Nm and 467.8 Nm 45 % more or 379.6 Nm
      Displacement 6.8 l. and 6.5 l. 4 % more or 0.3 l.

      Gear box

      Reverse gears number 8 and 6 25 % more or 2
      Forward gears number 8 and 6 25 % more or 2

      Front Axle

      Clearance 587 mm and 550 mm 6 % more or 37 mm

      Circle

      Maximum lifting above ground level 470 mm and 430 mm 9 % more or 40 mm

      5 reasons to buy Komatsu GD505A-2:

      Steerage

      Turn radius 6.6 m and 7.2 m 8 % less or 0.6 m

      Gear box

      Maximum forward speed 43.4 km/h and 40 km/h 8 % more or 3.4 km/h
      Maximum reverse gear 45 km/h and 40 km/h 11 % more or 5 km/h

      Circle

      Maximum radius outside left tyres 2050 mm and 2100 mm 2 % less or 50 mm
      Right maximum radius outside tyres 2000 mm and 2080 mm 4 % less or 80 mm

      Neutral reasons:

      Sizes

      Height to cab upper part 3180 mm and 2775 mm
      Dimensional length 8804 mm and 7920 mm
      Between tyres width 2490 mm and 2335 mm
      Wheelbase 6120 mm and 5780 mm
      Blade base 2568 mm and 2540 mm
      Dual axis wheelbase 1540 mm and 1505 mm

      Operation

      Overall standard operating weight 15254 kg and 10880 kg
      Tyre size 14.00R24 Radial PR and 13.00-24-8PR

      Motor

      Model 6068H and S6D105-1
      Manufacturer John Deere and Komatsu
      Aspiration Turbocharged engine with subsequent cooling of charging air by oncoming air flow and turbocharging

      Gear box

      Transmission type Powershift transmission with direct drive and Hydro-Gear switching

      Front Axle

      Wheel tilt 20 degrees and 20 degrees
      General fluctuations 32 degrees and 30 degrees

      Dump

      Mouldboard width 3660 mm and 3710 mm
      Mouldboard height 610 mm and 655 mm
      Mouldboard thickness 22 mm and 19 mm

      Images

      Sizes

      1. Dimensional length 8804 mm 1. Dimensional length 7920 mm
      2. Between tyres width 2490 mm 2. Between tyres width 2335 mm
      3. Height to cab upper part 3180 mm 3. Height to cab upper part 2775 mm
      4. Wheelbase 6120 mm 4. Wheelbase 5780 mm
      6. Front part clearance 587 mm 6. Front part clearance 550 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1505 mm
      8. Blade base 2568 mm 8. Blade base 2540 mm