vs.

      John Deere 770A vs. Caterpillar 140G

      5 reasons to buy John Deere 770A:

      Steerage

      Turn radius 6.7 m and 7.3 m 8 % less or 0.6 m

      Operation

      Hydraulic system fluid volume 117 l. and 68 l. 42 % more or 49 l.
      Generator current strength 42 amperes and 40 amperes 5 % more or 2 amperes

      Hydraulic system

      Pump flow rate 136.3 l/min and 193.1 l/min 29 % less or 56.8 l/min

      Gear box

      Forward gears number 8 and 6 25 % more or 2

      11 reasons to buy Caterpillar 140G:

      Operation

      Fuel Capacity 284 l. and 265 l. 7 % more or 19 l.
      Oil system fluid volume 29.3 l. and 18.9 l. 35 % more or 10.4 l.
      Cooling system fluid volume 47.3 l. and 26.5 l. 44 % more or 20.8 l.

      Motor

      Displacement 10.5 l. and 7.6 l. 28 % more or 2.9 l.

      Gear box

      Maximum reverse gear 41 km/h and 13.8 km/h 66 % more or 27.2 km/h
      Reverse gears number 6 and 4 33 % more or 2
      Maximum forward speed 41 km/h and 40.4 km/h 1 % more or 0.6 km/h

      Front Axle

      Clearance 610 mm and 572 mm 6 % more or 38 mm

      Circle

      Maximum radius outside left tyres 1960 mm and 2280 mm 14 % less or 320 mm
      Right maximum radius outside tyres 1830 mm and 2250 mm 19 % less or 420 mm
      Maximum lifting above ground level 464 mm and 432 mm 7 % more or 32 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 50 degrees

      Sizes

      Wheelbase 5970 mm and 5920 mm
      Blade base 2720 mm and 2570 mm
      Dual axis wheelbase 1540 mm and 1520 mm
      Height to cab upper part 3200 mm and 3360 mm
      Dimensional length 8470 mm and 8310 mm
      Between tyres width 2440 mm and 2440 mm

      Operation

      Overall standard operating weight 13725.7 kg and 12620 kg
      Tyre size 14.00-25 and 14x24 10PR
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer John Deere and Caterpillar
      Model 6-466A and 3306
      Cylinders number 6 and 6
      Maximum power 111.9 kW and 111.9 kW

      Hydraulic system

      Type of pump Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume and Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume

      Gear box

      Transmission type powershift and powershift transmission with direct drive

      Front Axle

      Wheel tilt 20 degrees and 18 degrees
      General fluctuations 30 degrees and 32 degrees

      Dump

      Mouldboard height 609.6 mm and 610 mm
      Mouldboard thickness 22.4 mm and 22 mm
      Left lateral displacement 683 mm and 660 mm
      Lateral right shift 683 mm and 660 mm
      Mouldboard width 3657.6 mm and 3660 mm

      Circle

      Diameter 1500 mm and 1530 mm
      Rotating 360 degrees and 360 degrees
      Left shift 851 mm and 650 mm
      Right shift 813 mm and 520 mm

      Images

      Sizes

      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1520 mm
      8. Blade base 2720 mm 8. Blade base 2570 mm
      1. Dimensional length 8470 mm 1. Dimensional length 8310 mm
      2. Between tyres width 2440 mm 2. Between tyres width 2440 mm
      3. Height to cab upper part 3200 mm 3. Height to cab upper part 3360 mm
      4. Wheelbase 5970 mm 4. Wheelbase 5920 mm