vs.

      John Deere 770A vs. Mitsubishi MG230-E

      13 reasons to buy John Deere 770A:

      Operation

      Generator current strength 42 amperes and 40 amperes 5 % more or 2 amperes
      Fuel Capacity 265 l. and 210 l. 21 % more or 55 l.
      Oil system fluid volume 18.9 l. and 16 l. 15 % more or 2.9 l.
      Hydraulic system fluid volume 117 l. and 110 l. 6 % more or 7 l.
      Circular gearbox fluid volume 3.8 l. and 3.5 l. 8 % more or 0.3 l.

      Motor

      Maximum power 111.9 kW and 85.8 kW 23 % more or 26.1 kW
      Displacement 7.6 l. and 5.9 l. 22 % more or 1.7 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Maximum forward speed 40.4 km/h and 32.6 km/h 19 % more or 7.8 km/h

      Front Axle

      Clearance 572 mm and 480 mm 16 % more or 92 mm

      Circle

      Blade tilt front angle 44 degrees and 40 degrees 9 % more or 4 degrees
      Blade tilt rear angle 10 degrees and 5 degrees 50 % more or 5 degrees
      Maximum lifting above ground level 432 mm and 430 mm 0 % more or 2 mm

      5 reasons to buy Mitsubishi MG230-E:

      Operation

      Each tandem case fluid volume 28 l. and 18.9 l. 32 % more or 9.1 l.

      Motor

      Power measured at 2500 rev / min and 2200 rev / min 12 % more or 300 rev

      Hydraulic system

      Pump flow rate 110 l/min and 136.3 l/min 19 % less or 26.3 l/min

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum reverse gear 33.2 km/h and 13.8 km/h 58 % more or 19.4 km/h

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 26 degrees

      Sizes

      Height to cab upper part 3200 mm and 3030 mm
      Dimensional length 8470 mm and 7325 mm
      Between tyres width 2440 mm and 2140 mm
      Wheelbase 5970 mm and 5300 mm
      Blade base 2720 mm and 2185 mm

      Operation

      Tyre size 14.00-25 and 13.00-24-12
      Operating voltage 24 V and 24 V
      Overall standard operating weight 13725.7 kg and 11060 kg

      Motor

      Manufacturer John Deere and Mitsubishi
      Cylinders number 6 and 6
      Model 6-466A and 6D34-TE1

      Hydraulic system

      Type of pump Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume and Pump with double gear

      Gear box

      Transmission type powershift and planetary gear

      Front Axle

      Wheel tilt 20 degrees and 20 degrees
      General fluctuations 30 degrees and 30 degrees

      Dump

      Mouldboard width 3657.6 mm and 3100 mm
      Mouldboard height 609.6 mm and 610 mm
      Mouldboard thickness 22.4 mm and 19 mm

      Circle

      Rotating 360 degrees and 360 degrees
      Left shift 851 mm and 1650 mm
      Right shift 813 mm and 1680 mm

      Images

      Sizes

      4. Wheelbase 5970 mm 4. Wheelbase 5300 mm
      8. Blade base 2720 mm 8. Blade base 2185 mm
      1. Dimensional length 8470 mm 1. Dimensional length 7325 mm
      2. Between tyres width 2440 mm 2. Between tyres width 2140 mm
      3. Height to cab upper part 3200 mm 3. Height to cab upper part 3030 mm