vs.

      John Deere 770B vs. New Holland G200

      6 reasons to buy John Deere 770B:

      Steerage

      Turn radius 6.7 m and 7289 m 100 % less or 7282.3 m

      Operation

      Circular gearbox fluid volume 3.8 l. and 2.8 l. 26 % more or 1.0 l.

      Motor

      Displacement 7.6 l. and 6.7 l. 12 % more or 0.9 l.

      Circle

      Right maximum radius outside tyres 2110 mm and 2174 mm 3 % less or 64 mm
      Maximum lifting above ground level 470 mm and 445 mm 5 % more or 25 mm
      Blade tilt front angle 49 degrees and 42 degrees 14 % more or 7 degrees

      16 reasons to buy New Holland G200:

      Sizes

      Front part clearance 622 mm and 572 mm 8 % more or 50 mm

      Operation

      Each tandem case fluid volume 22.7 l. and 18.9 l. 17 % more or 3.8 l.
      Generator current strength 80 amperes and 45 amperes 44 % more or 35 amperes
      Front axle standard operating weight 5102.9 kg and 3946.3 kg 23 % more or 1156.6 kg
      Rear axle standard operating weight 12014.8 kg and 10228.5 kg 15 % more or 1786.3 kg
      Cooling system fluid volume 39.7 l. and 38 l. 4 % more or 1.7 l.
      Hydraulic system fluid volume 179.8 l. and 87 l. 52 % more or 92.8 l.

      Motor

      Maximum power 152.9 kW and 115.6 kW 24 % more or 37.3 kW
      Effective speeds output 7-8 152.9 kW and 115.6 kW 24 % more or 37.3 kW
      Effective drives torque 7-8 881.3 Nm and 707.7 Nm 20 % more or 173.6 Nm
      Torque measured at 1600 rev / min and 1100 rev / min 31 % more or 500 rev

      Hydraulic system

      Pump flow rate 185.5 l/min and 198.4 l/min 7 % less or 12.9 l/min

      Gear box

      Maximum forward speed 43 km/h and 40.6 km/h 6 % more or 2.4 km/h
      Maximum reverse gear 30.6 km/h and 13.8 km/h 55 % more or 16.8 km/h

      Front Axle

      Clearance 622 mm and 572 mm 8 % more or 50 mm

      Circle

      Maximum radius outside left tyres 1978 mm and 2160 mm 8 % less or 182 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Wheelbase 5970 mm and 6219 mm
      Blade base 2670 mm and 2562 mm
      Dual axis wheelbase 1540 mm and 1602 mm
      Height to cab upper part 3090 mm and 3140 mm
      Dimensional length 8510 mm and 8555 mm
      Between tyres width 2440 mm and 2650 mm

      Operation

      Tyre size 14.00-24 and 14.00x24 10 layers G2
      Operating voltage 24 V and 24 V
      Overall standard operating weight 14174.8 kg and 17117.7 kg
      Fuel Capacity 340.7 l. and 340.7 l.

      Motor

      Cylinders number 6 and 6
      Aspiration turbocharging and turbocharging
      Manufacturer John Deere and Cummins
      Model 6076T and QSB 6.7L
      Power measured at 2200 rev / min and 2200 rev / min

      Hydraulic system

      Type of pump Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume and variable displacement piston pump

      Gear box

      Transmission type powershift and Powershift transmission with direct drive
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 20 degrees and 17.5 degrees
      General fluctuations 32 degrees and 19 degrees

      Dump

      Mouldboard width 3657.6 mm and 4267.2 mm
      Mouldboard height 609.6 mm and 622 mm
      Mouldboard thickness 22.4 mm and 22 mm
      Left lateral displacement 683 mm and 533 mm
      Lateral right shift 683 mm and 711 mm

      Circle

      Blade tilt rear angle 5 degrees and 5 degrees
      Diameter 1500 mm and 1753 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      4. Wheelbase 5970 mm 4. Wheelbase 6219 mm
      6. Front part clearance 572 mm 6. Front part clearance 622 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1602 mm
      8. Blade base 2670 mm 8. Blade base 2562 mm
      1. Dimensional length 8510 mm 1. Dimensional length 8555 mm
      2. Between tyres width 2440 mm 2. Between tyres width 2650 mm
      3. Height to cab upper part 3090 mm 3. Height to cab upper part 3140 mm