vs.

      John Deere 770B vs. Terex TG190TA-3

      7 reasons to buy John Deere 770B:

      Sizes

      Front part clearance 572 mm and 474 mm 17 % more or 98 mm

      Motor

      Displacement 7.6 l. and 6 l. 21 % more or 1.6 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 4 and 3 25 % more or 1
      Maximum forward speed 40.6 km/h and 40 km/h 1 % more or 0.6 km/h

      Front Axle

      Clearance 572 mm and 546 mm 5 % more or 26 mm

      Circle

      Maximum lifting above ground level 470 mm and 110 mm 77 % more or 360 mm

      11 reasons to buy Terex TG190TA-3:

      Operation

      Circular gearbox fluid volume 6 l. and 3.8 l. 37 % more or 2.2 l.
      Each tandem case fluid volume 21 l. and 18.9 l. 10 % more or 2.1 l.
      Generator current strength 55 amperes and 45 amperes 18 % more or 10 amperes
      Front axle standard operating weight 5000 kg and 3946.3 kg 21 % more or 1053.7 kg
      Rear axle standard operating weight 13700 kg and 10228.5 kg 25 % more or 3471.5 kg
      Fuel Capacity 480 l. and 340.7 l. 29 % more or 139.3 l.
      Cooling system fluid volume 42 l. and 38 l. 10 % more or 4 l.
      Hydraulic system fluid volume 170 l. and 87 l. 49 % more or 83 l.

      Motor

      Maximum power 131.2 kW and 115.6 kW 12 % more or 15.6 kW

      Hydraulic system

      Pump flow rate 99 l/min and 198.4 l/min 50 % less or 99.4 l/min

      Gear box

      Maximum reverse gear 19.4 km/h and 13.8 km/h 29 % more or 5.6 km/h

      Neutral reasons:

      Sizes

      Dual axis wheelbase 1540 mm and 510 mm
      Height to cab upper part 3090 mm and 3300 mm
      Dimensional length 8510 mm and 10266 mm
      Between tyres width 2440 mm and 2490 mm
      Wheelbase 5970 mm and 6136 mm

      Operation

      Tyre size 14.00-24 and 14.00 -24TG
      Operating voltage 24 V and 24 V
      Overall standard operating weight 14174.8 kg and 18700 kg

      Motor

      Manufacturer John Deere and Cummins
      Aspiration turbocharging and turbocharging, water cooling

      Hydraulic system

      Type of pump Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume and axial piston pump

      Gear box

      Transmission type powershift and powershift transmission with torque converter

      Front Axle

      Wheel tilt 20 degrees and 17 degrees
      General fluctuations 32 degrees and 15 degrees

      Dump

      Mouldboard width 3657.6 mm and 3660 mm
      Mouldboard height 609.6 mm and 630 mm
      Mouldboard thickness 22.4 mm and 20 mm

      Circle

      Diameter 1500 mm and 1510 mm

      Images

      Sizes

      4. Wheelbase 5970 mm 4. Wheelbase 6136 mm
      6. Front part clearance 572 mm 6. Front part clearance 474 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 510 mm
      1. Dimensional length 8510 mm 1. Dimensional length 10266 mm
      2. Between tyres width 2440 mm 2. Between tyres width 2490 mm
      3. Height to cab upper part 3090 mm 3. Height to cab upper part 3300 mm