- Home/
- Comparison/
- Grader/
- John Deere 770C vs. John Deere 570B
John Deere 770C vs. John Deere 570B
22 reasons to buy John Deere 770C:
Sizes
Front part clearance | 638 mm and 597 mm | 6 % more or 41 mm |
Operation
Front axle maximum operating weight | 4495.1 kg and 3073 kg | 32 % more or 1422.1 kg |
Fuel Capacity | 401.3 l. and 189 l. | 53 % more or 212.3 l. |
Rear axle maximum operating weight | 11847.8 kg and 6771 kg | 43 % more or 5076.8 kg |
Oil system fluid volume | 29 l. and 11 l. | 62 % more or 18 l. |
Cooling system fluid volume | 45.4 l. and 21.1 l. | 54 % more or 24.3 l. |
Hydraulic system fluid volume | 59 l. and 53 l. | 10 % more or 6 l. |
Circular gearbox fluid volume | 3.8 l. and 1.4 l. | 63 % more or 2.4 l. |
Each tandem case fluid volume | 75 l. and 19 l. | 75 % more or 56 l. |
Generator current strength | 55 amperes and 42 amperes | 24 % more or 13 amperes |
Front axle standard operating weight | 3987.1 kg and 2597 kg | 35 % more or 1390.1 kg |
Rear axle standard operating weight | 10210.4 kg and 6477 kg | 37 % more or 3733.4 kg |
Motor
Effective speeds output 7-8 | 115.6 kW and 67.1 kW | 42 % more or 48.5 kW |
Maximum power | 115.6 kW and 67.1 kW | 42 % more or 48.5 kW |
Effective drives torque 7-8 | 744.3 Nm and 339 Nm | 54 % more or 405.3 Nm |
Displacement | 8.1 l. and 5.9 l. | 27 % more or 2.2 l. |
Gear box
Reverse gears number | 8 and 4 | 50 % more or 4 |
Maximum forward speed | 41.5 km/h and 34.8 km/h | 16 % more or 6.7 km/h |
Maximum reverse gear | 41.5 km/h and 11.4 km/h | 73 % more or 30.1 km/h |
Front Axle
Clearance | 638 mm and 597 mm | 6 % more or 41 mm |
Circle
Maximum lifting above ground level | 470 mm and 330 mm | 30 % more or 140 mm |
Blade tilt front angle | 49 degrees and 32 degrees | 35 % more or 17 degrees |
6 reasons to buy John Deere 570B:
Steerage
Turn radius | 5.5 m and 6.7 m | 18 % less or 1.2 m |
Motor
Power measured at | 2300 rev / min and 2000 rev / min | 13 % more or 300 rev |
Torque measured at | 1300 rev / min and 900 rev / min | 31 % more or 400 rev |
Hydraulic system
Pump flow rate | 102 l/min and 207.1 l/min | 51 % less or 105.1 l/min |
Circle
Maximum radius outside left tyres | 1960 mm and 2160 mm | 9 % less or 200 mm |
Right maximum radius outside tyres | 1820 mm and 2110 mm | 14 % less or 290 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 25 degrees and 22 degrees |
Sizes
Blade base | 2670 mm and 2340 mm |
Dual axis wheelbase | 1540 mm and 1440 mm |
Height to cab upper part | 3120 mm and 3090 mm |
Dimensional length | 8610 mm and 7430 mm |
Between tyres width | 2510 mm and 2410 mm |
Wheelbase | 5970 mm and 5280 mm |
Operation
Total maximum operating weight | 16342.9 kg and 9844 kg |
Tyre size | 14.00-24 and 13.00-24 |
Operating voltage | 24 V and 24 V |
Overall standard operating weight | 14197.4 kg and 9174 kg |
Motor
Manufacturer | John Deere and John Deere |
Model | 6081H and 6059D |
Cylinders number | 6 and 6 |
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and natural aspiration |
Hydraulic system
Type of pump | variable displacement with locking in the middle position and Variable displacement volume with controlled pressure |
Gear box
Transmission type | powershift and powershift |
Forward gears number | 8 and 8 |
Front Axle
Wheel tilt | 20 degrees and 20 degrees |
General fluctuations | 32 degrees and 30 degrees |
Dump
Mouldboard width | 3657.6 mm and 3.7 mm |
Mouldboard height | 609.6 mm and 559 mm |
Mouldboard thickness | 22.4 mm and 16 mm |
Left lateral displacement | 683 mm and 794 mm |
Lateral right shift | 683 mm and 679 mm |
Circle
Diameter | 1520 mm and 1370 mm |
Rotating | 360 degrees and 360 degrees |
Images
Sizes
1. Dimensional length | 8610 mm | 1. Dimensional length | 7430 mm |
2. Between tyres width | 2510 mm | 2. Between tyres width | 2410 mm |
3. Height to cab upper part | 3120 mm | 3. Height to cab upper part | 3090 mm |
4. Wheelbase | 5970 mm | 4. Wheelbase | 5280 mm |
6. Front part clearance | 638 mm | 6. Front part clearance | 597 mm |
7. Dual axis wheelbase | 1540 mm | 7. Dual axis wheelbase | 1440 mm |
8. Blade base | 2670 mm | 8. Blade base | 2340 mm |