vs.

      John Deere 770C vs. Mitsubishi MG430-E

      10 reasons to buy John Deere 770C:

      Operation

      Generator current strength 55 amperes and 40 amperes 27 % more or 15 amperes
      Fuel Capacity 401.3 l. and 210 l. 48 % more or 191.3 l.
      Oil system fluid volume 29 l. and 16 l. 45 % more or 13 l.
      Transmission fluid volume 38 l. and 23 l. 39 % more or 15 l.
      Circular gearbox fluid volume 3.8 l. and 3.5 l. 8 % more or 0.3 l.
      Each tandem case fluid volume 75 l. and 28 l. 63 % more or 47 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 8 and 6 25 % more or 2

      Front Axle

      Clearance 638 mm and 600 mm 6 % more or 38 mm

      Circle

      Blade tilt front angle 49 degrees and 40 degrees 18 % more or 9 degrees

      7 reasons to buy Mitsubishi MG430-E:

      Operation

      Hydraulic system fluid volume 67 l. and 59 l. 12 % more or 8 l.

      Motor

      Displacement 11.9 l. and 8.1 l. 32 % more or 3.8 l.

      Hydraulic system

      Pump flow rate 100 l/min and 207.1 l/min 52 % less or 107.1 l/min

      Gear box

      Maximum forward speed 45.1 km/h and 41.5 km/h 8 % more or 3.6 km/h
      Maximum reverse gear 45.9 km/h and 41.5 km/h 10 % more or 4.4 km/h

      Circle

      Blade tilt rear angle 8 degrees and 5 degrees 37 % more or 3 degrees
      Maximum lifting above ground level 490 mm and 470 mm 4 % more or 20 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 29 degrees

      Sizes

      Blade base 2670 mm and 2670 mm
      Height to cab upper part 3120 mm and 3130 mm
      Dimensional length 8610 mm and 8505 mm
      Between tyres width 2510 mm and 2470 mm
      Wheelbase 5970 mm and 6250 mm

      Operation

      Tyre size 14.00-24 and 14.00-24-12
      Operating voltage 24 V and 24 V
      Overall standard operating weight 14197.4 kg and 16400 kg

      Motor

      Manufacturer John Deere and Mitsubishi
      Model 6081H and 6D24-E1
      Power measured at 2000 rev / min and 2000 rev / min
      Cylinders number 6 and 6
      Maximum power 115.6 kW and 115.6 kW

      Hydraulic system

      Type of pump variable displacement with locking in the middle position and Pump with double gear
      Overflow valve pressure 17581.6 kPa and 17.2 kPa

      Gear box

      Transmission type powershift and planetary gear

      Front Axle

      Wheel tilt 20 degrees and 20 degrees
      General fluctuations 32 degrees and 30 degrees

      Dump

      Mouldboard height 609.6 mm and 610 mm
      Mouldboard thickness 22.4 mm and 22 mm

      Circle

      Rotating 360 degrees and 360 degrees
      Left shift 787 mm and 1980 mm
      Right shift 724 mm and 2000 mm

      Images

      Sizes

      8. Blade base 2670 mm 8. Blade base 2670 mm
      1. Dimensional length 8610 mm 1. Dimensional length 8505 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2470 mm
      3. Height to cab upper part 3120 mm 3. Height to cab upper part 3130 mm
      4. Wheelbase 5970 mm 4. Wheelbase 6250 mm