vs.

      John Deere 770CH vs. Dressta RD200C

      13 reasons to buy John Deere 770CH:

      Steerage

      Turn radius 6.7 m and 7500 m 100 % less or 7493.3 m

      Operation

      Transmission fluid volume 38 l. and 35 l. 8 % more or 3 l.
      Rear differential/final drive fluid volume 36 l. and 7.5 l. 79 % more or 28.5 l.
      Each tandem case fluid volume 75 l. and 30 l. 60 % more or 45 l.
      Fuel Capacity 401.3 l. and 380 l. 5 % more or 21.3 l.
      Cooling system fluid volume 45.4 l. and 40 l. 12 % more or 5.4 l.

      Motor

      Effective speeds output 5-6 152.9 kW and 132.7 kW 13 % more or 20.2 kW
      Displacement 8.1 l. and 6.7 l. 17 % more or 1.4 l.
      Maximum power 152.9 kW and 132.7 kW 13 % more or 20.2 kW

      Gear box

      Maximum reverse gear 41.5 km/h and 31.4 km/h 24 % more or 10.1 km/h
      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 8 and 3 62 % more or 5

      Front Axle

      Clearance 638 mm and 550 mm 14 % more or 88 mm

      8 reasons to buy Dressta RD200C:

      Operation

      Generator current strength 75 amperes and 55 amperes 27 % more or 20 amperes
      Hydraulic system fluid volume 130 l. and 59 l. 55 % more or 71 l.

      Motor

      Power measured at 2400 rev / min and 1900 rev / min 21 % more or 500 rev
      Effective drives torque 5-6 929 Nm and 924.7 Nm 0 % more or 4.3 Nm
      Torque measured at 1500 rev / min and 900 rev / min 40 % more or 600 rev

      Hydraulic system

      Pump flow rate 80 l/min and 207.1 l/min 61 % less or 127.1 l/min

      Gear box

      Maximum forward speed 44.7 km/h and 41.5 km/h 7 % more or 3.2 km/h

      Circle

      Maximum lifting above ground level 500 mm and 470 mm 6 % more or 30 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Height to cab upper part 3120 mm and 3300 mm
      Dimensional length 8610 mm and 9540 mm
      Between tyres width 2510 mm and 2500 mm
      Wheelbase 5970 mm and 7300 mm
      Blade base 2670 mm and 3050 mm
      Dual axis wheelbase 1540 mm and 1540 mm

      Operation

      Tyre size 14.00-24 and 14.00 - 24 G-2 16PR
      Operating voltage 24 V and 24 V
      Overall standard operating weight 14288.2 kg and 36376 kg

      Motor

      Model 6081H and QSB 6.7
      Cylinders number 6 and 6
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging and CAC
      Manufacturer John Deere and Cummins

      Hydraulic system

      Type of pump variable displacement with locking in the middle position and axial piston pump
      Overflow valve pressure 17581.6 kPa and 14000 kPa

      Gear box

      Transmission type powershift and powershift transmission

      Front Axle

      Wheel tilt 20 degrees and 22 degrees
      General fluctuations 32 degrees and 40 degrees

      Dump

      Mouldboard width 3657.6 mm and 3660 mm
      Mouldboard height 609.6 mm and 670 mm
      Mouldboard thickness 22.4 mm and 22 mm
      Left lateral displacement 683 mm and 800 mm
      Lateral right shift 683 mm and 800 mm

      Circle

      Diameter 1520 mm and 1350 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      3. Height to cab upper part 3120 mm 3. Height to cab upper part 3300 mm
      4. Wheelbase 5970 mm 4. Wheelbase 7300 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2670 mm 8. Blade base 3050 mm
      1. Dimensional length 8610 mm 1. Dimensional length 9540 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2500 mm