vs.

      John Deere 770CH vs. New Holland RG140.B

      22 reasons to buy John Deere 770CH:

      Steerage

      Turn radius 6.7 m and 7250 m 100 % less or 7243.3 m

      Operation

      Fuel Capacity 401.3 l. and 341 l. 15 % more or 60.3 l.
      Cooling system fluid volume 45.4 l. and 40 l. 12 % more or 5.4 l.
      Transmission fluid volume 38 l. and 25 l. 34 % more or 13 l.
      Rear differential/final drive fluid volume 36 l. and 29 l. 19 % more or 7 l.
      Circular gearbox fluid volume 3.8 l. and 2.8 l. 26 % more or 1.0 l.
      Front axle standard operating weight 3987.1 kg and 3700 kg 7 % more or 287.1 kg
      Each tandem case fluid volume 75 l. and 29 l. 61 % more or 46 l.
      Rear axle standard operating weight 10301.1 kg and 9707 kg 6 % more or 594.1 kg
      Front axle maximum operating weight 4495.1 kg and 3700 kg 18 % more or 795.1 kg
      Rear axle maximum operating weight 11938.6 kg and 9807 kg 18 % more or 2131.6 kg

      Motor

      Effective speeds output 5-6 152.9 kW and 104.4 kW 32 % more or 48.5 kW
      Maximum power 152.9 kW and 104.4 kW 32 % more or 48.5 kW
      Effective drives torque 7-8 924.7 Nm and 657.6 Nm 29 % more or 267.1 Nm
      Effective speeds output 7-8 152.9 kW and 104.4 kW 32 % more or 48.5 kW
      Displacement 8.1 l. and 5.9 l. 27 % more or 2.2 l.

      Gear box

      Maximum reverse gear 41.5 km/h and 30 km/h 28 % more or 11.5 km/h
      Reverse gears number 8 and 4 50 % more or 4

      Front Axle

      Clearance 638 mm and 610 mm 4 % more or 28 mm

      Circle

      Right maximum radius outside tyres 2110 mm and 2174 mm 3 % less or 64 mm
      Maximum lifting above ground level 470 mm and 445 mm 5 % more or 25 mm
      Blade tilt front angle 49 degrees and 42 degrees 14 % more or 7 degrees

      6 reasons to buy New Holland RG140.B:

      Operation

      Hydraulic system fluid volume 180 l. and 59 l. 67 % more or 121 l.
      Generator current strength 70 amperes and 55 amperes 21 % more or 15 amperes

      Motor

      Power measured at 2200 rev / min and 1900 rev / min 14 % more or 300 rev

      Hydraulic system

      Pump flow rate 191.2 l/min and 207.1 l/min 8 % less or 15.9 l/min

      Gear box

      Maximum forward speed 42.9 km/h and 41.5 km/h 3 % more or 1.4 km/h

      Circle

      Maximum radius outside left tyres 1978 mm and 2160 mm 8 % less or 182 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Dual axis wheelbase 1540 mm and 1594 mm
      Height to cab upper part 3120 mm and 3140 mm
      Dimensional length 8610 mm and 8521 mm
      Between tyres width 2510 mm and 2512 mm
      Wheelbase 5970 mm and 6219 mm
      Blade base 2670 mm and 2562 mm

      Operation

      Total maximum operating weight 16433.7 kg and 13506 kg
      Tyre size 14.00-24 and 14x24 12 layers G2
      Overall standard operating weight 14288.2 kg and 13506 kg
      Operating voltage 24 V and 24 V

      Motor

      Cylinders number 6 and 6
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging
      Manufacturer John Deere and BT
      Model 6081H and Cummins 6A 5.9

      Hydraulic system

      Type of pump variable displacement with locking in the middle position and variable displacement piston pump with load sensing
      Overflow valve pressure 17581.6 kPa and 17926.4 kPa

      Gear box

      Transmission type powershift and powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 20 degrees and 25 degrees
      General fluctuations 32 degrees and 20 degrees

      Dump

      Mouldboard width 3657.6 mm and 3658 mm
      Mouldboard height 609.6 mm and 622 mm
      Mouldboard thickness 22.4 mm and 22 mm
      Left lateral displacement 683 mm and 533 mm
      Lateral right shift 683 mm and 686 mm

      Circle

      Blade tilt rear angle 5 degrees and 5 degrees
      Diameter 1520 mm and 1753 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      4. Wheelbase 5970 mm 4. Wheelbase 6219 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1594 mm
      8. Blade base 2670 mm 8. Blade base 2562 mm
      1. Dimensional length 8610 mm 1. Dimensional length 8521 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2512 mm
      3. Height to cab upper part 3120 mm 3. Height to cab upper part 3140 mm