vs.

      John Deere 770CH vs. Sany PQ160III

      4 reasons to buy John Deere 770CH:

      Gear box

      Maximum forward speed 41.5 km/h and 32 km/h 23 % more or 9.5 km/h
      Maximum reverse gear 41.5 km/h and 32 km/h 23 % more or 9.5 km/h
      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 8 and 3 62 % more or 5

      8 reasons to buy Sany PQ160III:

      Steerage

      Turn radius 3.1 m and 6.7 m 54 % less or 3.6 m

      Motor

      Power measured at 2200 rev / min and 1900 rev / min 14 % more or 300 rev
      Effective speeds output 1-2 129 kW and 123 kW 5 % more or 6 kW
      Maximum power 173 kW and 152.9 kW 12 % more or 20.1 kW

      Circle

      Maximum radius outside left tyres 59 mm and 2160 mm 97 % less or 2101 mm
      Right maximum radius outside tyres 58 mm and 2110 mm 97 % less or 2052 mm
      Blade tilt front angle 90 degrees and 49 degrees 46 % more or 41 degrees
      Blade tilt rear angle 90 degrees and 5 degrees 94 % more or 85 degrees

      Neutral reasons:

      Sizes

      Height to cab upper part 3120 mm and 3218 mm
      Dimensional length 8610 mm and 3660 mm
      Between tyres width 2510 mm and 2740 mm

      Operation

      Overall standard operating weight 14288.2 kg and 14000 kg

      Motor

      Manufacturer John Deere and Cummins
      Model 6081H and QSB6.7-C173
      Cylinders number 6 and 6

      Gear box

      Transmission type powershift and Hydro-Static Transmission

      Front Axle

      Wheel tilt 20 degrees and 17 degrees
      General fluctuations 32 degrees and 15 degrees

      Dump

      Mouldboard thickness 22.4 mm and 22 mm
      Mouldboard width 3657.6 mm and 3660 mm
      Mouldboard height 609.6 mm and 610 mm

      Circle

      Maximum lifting above ground level 470 mm and 470 mm

      Images

      Sizes

      2. Between tyres width 2510 mm 2. Between tyres width 2740 mm
      3. Height to cab upper part 3120 mm 3. Height to cab upper part 3218 mm
      1. Dimensional length 8610 mm 1. Dimensional length 3660 mm