vs.

      John Deere 770CH vs. Sany PQ190III

      4 reasons to buy John Deere 770CH:

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 8 and 3 62 % more or 5
      Maximum forward speed 41.5 km/h and 32 km/h 23 % more or 9.5 km/h

      Circle

      Maximum lifting above ground level 470 mm and 420 mm 11 % more or 50 mm

      7 reasons to buy Sany PQ190III:

      Steerage

      Turn radius 6.2 m and 6.7 m 7 % less or 0.5 m

      Motor

      Maximum power 193 kW and 152.9 kW 21 % more or 40.1 kW
      Effective speeds output 1-2 144 kW and 123 kW 15 % more or 21 kW
      Power measured at 2200 rev / min and 1900 rev / min 14 % more or 300 rev

      Circle

      Right maximum radius outside tyres 75 mm and 2110 mm 96 % less or 2035 mm
      Blade tilt front angle 90 degrees and 49 degrees 46 % more or 41 degrees
      Maximum radius outside left tyres 60 mm and 2160 mm 97 % less or 2100 mm

      Neutral reasons:

      Sizes

      Height to cab upper part 3120 mm and 3218 mm
      Dimensional length 8610 mm and 9095 mm
      Between tyres width 2510 mm and 2648 mm

      Operation

      Overall standard operating weight 14288.2 kg and 16270 kg

      Motor

      Manufacturer John Deere and Cummins
      Model 6081H and QSB6.7
      Cylinders number 6 and 6

      Front Axle

      Wheel tilt 20 degrees and 17 degrees
      General fluctuations 32 degrees and 15 degrees

      Dump

      Mouldboard width 3657.6 mm and 3965 mm
      Mouldboard height 609.6 mm and 610 mm
      Mouldboard thickness 22.4 mm and 22 mm

      Images

      Sizes

      1. Dimensional length 8610 mm 1. Dimensional length 9095 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2648 mm
      3. Height to cab upper part 3120 mm 3. Height to cab upper part 3218 mm