vs.

      John Deere 770D vs. Case 885

      16 reasons to buy John Deere 770D:

      Steerage

      Turn radius 7 m and 7289 m 100 % less or 7282 m

      Sizes

      Front part clearance 638 mm and 622 mm 3 % more or 16 mm

      Operation

      Rear differential/final drive fluid volume 36 l. and 12 l. 67 % more or 24 l.
      Circular gearbox fluid volume 5.7 l. and 2.8 l. 51 % more or 2.9 l.
      Each tandem case fluid volume 75.7 l. and 22.7 l. 70 % more or 53.0 l.
      Fuel Capacity 401.2 l. and 340.7 l. 15 % more or 60.5 l.
      Cooling system fluid volume 49.2 l. and 40 l. 19 % more or 9.2 l.
      Generator current strength 100 amperes and 80 amperes 20 % more or 20 amperes

      Motor

      Effective speeds output 7-8 160.3 kW and 152.9 kW 5 % more or 7.4 kW
      Maximum power 160.3 kW and 152.9 kW 5 % more or 7.4 kW
      Effective drives torque 7-8 1223 Nm and 881 Nm 28 % more or 342 Nm
      Displacement 8.1 l. and 6.7 l. 17 % more or 1.4 l.

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum reverse gear 41.6 km/h and 30.6 km/h 26 % more or 11.0 km/h

      Front Axle

      Clearance 638 mm and 622 mm 3 % more or 16 mm

      Circle

      Maximum lifting above ground level 470 mm and 442.5 mm 6 % more or 27.5 mm

      8 reasons to buy Case 885:

      Operation

      Hydraulic system fluid volume 190 l. and 53 l. 72 % more or 137 l.
      Transmission fluid volume 23 l. and 22.7 l. 1 % more or 0.3 l.
      Front axle standard operating weight 5103 kg and 3860 kg 24 % more or 1243 kg
      Rear axle standard operating weight 12147 kg and 10959 kg 10 % more or 1188 kg

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Torque measured at 1500 rev / min and 1000 rev / min 33 % more or 500 rev

      Hydraulic system

      Pump flow rate 143.5 l/min and 207 l/min 31 % less or 63.5 l/min

      Gear box

      Maximum forward speed 43 km/h and 41.6 km/h 3 % more or 1.4 km/h

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Height to cab upper part 3180 mm and 3340 mm
      Dual axis wheelbase 1540 mm and 1602 mm
      Dimensional length 8804 mm and 8534 mm
      Between tyres width 2510 mm and 2650 mm
      Wheelbase 6120 mm and 6219 mm
      Blade base 2568 mm and 2562 mm

      Operation

      Overall standard operating weight 14819 kg and 17250 kg
      Tyre size 14.00R24 Radial PR and 14.0 x 24 12PR TL G2 Firestone
      Operating voltage 24 V and 24 V

      Motor

      Aspiration Turbocharged engine with subsequent cooling of charging air by oncoming air flow and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer John Deere and Cummins
      Model 6081H and QSB 6.7, III Level III certified
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump variable displacement piston pump and piston pump
      Overflow valve pressure 18960.6 kPa and 42002.8 kPa

      Gear box

      Forward gears number 8 and 8
      Transmission type Powershift transmission with direct drive and powershift

      Front Axle

      Wheel tilt 20 degrees and 17.5 degrees
      General fluctuations 32 degrees and 38 degrees

      Dump

      Left lateral displacement 680 mm and 533 mm
      Lateral right shift 680 mm and 686 mm
      Mouldboard width 3660 mm and 4267 mm
      Mouldboard height 610 mm and 600 mm
      Mouldboard thickness 22 mm and 22.2 mm

      Circle

      Diameter 1520 mm and 1752 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8804 mm 1. Dimensional length 8534 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2650 mm
      3. Height to cab upper part 3180 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 6120 mm 4. Wheelbase 6219 mm
      6. Front part clearance 638 mm 6. Front part clearance 622 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1602 mm
      8. Blade base 2568 mm 8. Blade base 2562 mm