vs.

      John Deere 770D vs. Mauldin MG618

      11 reasons to buy John Deere 770D:

      Operation

      Front axle standard operating weight 3860 kg and 2540.1 kg 34 % more or 1319.9 kg
      Rear axle standard operating weight 10959 kg and 5892.2 kg 46 % more or 5066.8 kg
      Fuel Capacity 401.2 l. and 151.4 l. 62 % more or 249.8 l.

      Motor

      Displacement 8.1 l. and 4 l. 51 % more or 4.1 l.
      Maximum power 160.3 kW and 99.2 kW 38 % more or 61.1 kW
      Effective drives torque 1-2 937 Nm and 492.6 Nm 47 % more or 444.4 Nm

      Gear box

      Maximum reverse gear 41.6 km/h and 27.4 km/h 34 % more or 14.2 km/h
      Forward gears number 8 and 2 75 % more or 6
      Reverse gears number 8 and 2 75 % more or 6
      Maximum forward speed 41.6 km/h and 27.4 km/h 34 % more or 14.2 km/h

      Circle

      Maximum lifting above ground level 470 mm and 349.3 mm 26 % more or 120.7 mm

      6 reasons to buy Mauldin MG618:

      Steerage

      Turn radius 5.5 m and 7 m 21 % less or 1.5 m

      Operation

      Hydraulic system fluid volume 75.7 l. and 53 l. 30 % more or 22.7 l.

      Circle

      Maximum radius outside left tyres 914.4 mm and 2100 mm 56 % less or 1185.6 mm
      Right maximum radius outside tyres 914.4 mm and 2080 mm 56 % less or 1165.6 mm
      Blade tilt front angle 45 degrees and 42 degrees 7 % more or 3 degrees
      Blade tilt rear angle 45 degrees and 5 degrees 89 % more or 40 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 32 degrees

      Sizes

      Wheelbase 6120 mm and 5029.2 mm
      Blade base 2568 mm and 2069.6 mm
      Dual axis wheelbase 1540 mm and 1130.8 mm
      Height to cab upper part 3180 mm and 2767.6 mm
      Dimensional length 8804 mm and 7010.4 mm
      Between tyres width 2510 mm and 2258.6 mm

      Operation

      Operating voltage 24 V and 12 V
      Overall standard operating weight 14819 kg and 8432.3 kg
      Tyre size 14.00R24 Radial PR and 15-19.5

      Motor

      Model 6081H and 2012
      Aspiration Turbocharged engine with subsequent cooling of charging air by oncoming air flow and turbocharging and cooling at the outlet
      Manufacturer John Deere and Deutz

      Gear box

      Transmission type Powershift transmission with direct drive and hydrostatic

      Front Axle

      Wheel tilt 20 degrees and 20 degrees
      General fluctuations 32 degrees and 30 degrees

      Dump

      Mouldboard width 3660 mm and 3048 mm
      Mouldboard height 610 mm and 482.6 mm

      Images

      Sizes

      1. Dimensional length 8804 mm 1. Dimensional length 7010.4 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2258.6 mm
      3. Height to cab upper part 3180 mm 3. Height to cab upper part 2767.6 mm
      4. Wheelbase 6120 mm 4. Wheelbase 5029.2 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1130.8 mm
      8. Blade base 2568 mm 8. Blade base 2069.6 mm